Separate names with a comma.
Here is a place that sells bodyside molding, but not specifically for the Prius. This particular unit might be what you are looking for, it comes...
Can you post the wiring/color connections? Thanks.
So, Native2PS, any word on progress?
Check the plastic housing the switch is in, it may have cracked where it is anchored to the frame.
Did you try checking the 12v battery voltage? Should be at least 12v at rest.
Open the door and look at the body frame, look for a black rubber covered spring loaded button. That should be the switch that activates dash...
It is probably this item: 2004 2009 Prius Engine Splash Shield Lower TO1228141 Under Cover Center Plastic | eBay
Agreed, just realized he might still be under warranty. But a second opinion would be useful. :)
Since you live in the Bay area you should have it checked out by these folks: Luscious Garage | Hybrid Specialists They have been mentioned a...
Yep, was my wife's daily car, now I drive it with less miles per day. She got a 2014 Prius V to drive now, very nice car. It's a two and the only...
2006, 139k and no HV battery problems.
I've got 37k on my '06 and just measured the tread depth, a little less than 8/32 left. I think I'm good to go to 60k. Eccopia EP442 @44/42psi...
Yep, a really annoying omission by Toyota.
The p1121 code is related to the coolant control valve. See following video: [media]
Ok, here is the display pic, it only has 1743 miles and it is 52.9mpg. I drove the first 500+ miles and my wife is the regular driver. She drives...
Yep, another tool to buy. :(
Go to Home Depot or Lowes and look for knockout plugs for circuit breaker boxes. They are about $1.20 ea for the 2" plugs, they pop in nice and...
Got a v2 in mid March, now with about 1100 miles average 51 mpg in mix urban/suburban/freeway driving. I still have the oem tires pumped up to...
I just replaced the oem aux battery with the Optima battery today and all was well until sometime later I noticed the auto up/down problem listed...
I agree, I have been thinking that the only easy solution would be try to block out a portion of the lens. Next project. :D
