Separate names with a comma.
as an old enginer version 5 owner, i would strongly advise you take measures to reduce the high voltage cut off point. 3.85v cut off will...
Hi John, The PIS rear board has a bms loop that i can use, it an alarm function occurs the bms loop is broken and the pis kit shuts down, thats...
Dont think the plug in supply does that to be honest. From the limited test i done from the 1st charge i did notice the phev contactors coming...
Hi John, the pis board has got a connector for a bms signal, I ca wire up my cell logger alarms to that so when a cell goes low it will disable...
Thanks again John, looks like a duinomite is a project that will have to happen then. Ok, just to clarify, your basic program already...
Yes I know, should have listened. Trying to do it in a budget, buy realising that this type of project costs can escalate very quickly. Nearly...
hi John, Well, the batteries are in, and i finished the cell log wiring to the relay pcb`s today. I used relay boards similar to the ones you...
Hi all, hopefully one of you will reside neat Seattle on the east coast. I am considering th epurchase of a Zivan NG3 charger for my plug in...
I am looking for a charger to charge my plug in prius lifepo4 battery pack. The pack has 70 cells in series, but i may increase that to 76...
Hi Sushp, in aberdare buddy
Update for you. I managed to find a download for techstream and driver software, plugged it in and interrogated the prius ecu's. I Am abit...
Hi Paul, I have today received a Chinese techstream dongle,but gutted too as the install cd and techstream software disc was broken in transit, I...
Hi dan, I have tried that a few times to be honest. When i insert the key and press the start button with the brake pedal pressed, the...
Hi all Update, received a pdf file form Robb at PIS outlining the front and ear pcb layouts, and some explanations of function. I have removed...
Hi all, I have a pis plug in hybrid kit. Is there a way the torque app can display the actual state of charge and also the spoofed state of...
Hi MJ, Not sure what you mean by wired the 'ice kill' above. If you're referring to the wiring that toggles the EV Mode switch, then yes, that's...
I have just removed my enginer phev kit and have started the install of a plug in prius kit I had purchase earlier in the year from here. I...
OK, think i`ve worked out the wiring, pic 1, these wires go to the -ve and +ve of the battery pack pic 2, one to the 240v power supply, the...
Hi all, asking those that are using the junsi cell loggers to monitor thier phev packs, I am gong to use 10 cell loggers to monitor my phev...
Hi Boone, It must be really frustrating not getting the adaptor to connect to your phone. Have you considered trying a different phone to...
