Separate names with a comma.
Will this fit a 2011 prius?
This might suffice.[ATTACH]
I cannot find that part anywhere, including ebay. Do you have a link?
No rodents, which is likely due to the steps I took over a year ago to screen off all entry points. And would you care to explain how covering up...
Prius is 2011. I'm concerned that rodents could get inside and damage or destroy this exposed wiring. I'm wondering why it is not covered in some...
is that like a solid Teflon or polyurethane block and how is it attached to the aluminum angle bar? Is it held on by a recessed bolt that I can't...
So I went ahead and made my own pinch weld adapter out of a piece of 2x4 which sits on top of a round piece of plywood that fits in the recessed...
Yes, some pics would be helpful, thanks.
This method is quick since it raises *both* front and rear tires at the same time, per side. I used my floor jack placed slightly forward of...
Ok, that makes sense, but the replacement sensor I bought from autozone already comes with that white thread locker tape on it. Not sure but it...
While waiting for Amazon to deliver the 24 mm deep socket tomorrow, after removing the passenger side front wheel and that little panel I was able...
I found this one, which should be perfect for the job. And at just $8, it's a good deal too! [ATTACH]
I'm wondering if a socket with a 3/8" drive would be easier to get into the confined space versus a half inch drive? I see 24mm deep sockets are...
Does it take a specific type of socket to remove the sensor?
Is this oil pressure sensor leaking oil? [ATTACH] [ATTACH]
Lately I've noticed oil drops on my driveway and I looked underneath and it looks like it's all concentrated around the oil pressure sensor. Could...
Best option is to simply wait at least a year until there are used low mileage 2023s available.
Yeah, I should have updated that.
Although it's not pictured, I had cut down the original plastic retainer so I could just reinstall the very front portion, which allowed me to put...
