Separate names with a comma.
OK thanks for the replies. I had a little time tonight to check some codes. P0A80, P3023, P3000, C1310. Battery fan is running on high...
Weekend greetings! I got the red triangle of death this morning with all of the associated chimes and other lights. Battery charges up and...
I'll definitely give it a try sometime and will keep the post updated. Thanks!
I have not yet. Mostly due to the craziness of Covid and it also being 110 degrees every day in Phoenix. I will find it eventually haha.
That is really odd. What you describe is exactly what I am experiencing. I even changed the passenger side axle since that's where the microphone...
Couple of thoughts. P0420 is more than likely a bad CAT or bad O2 sensor. When you replaced the thermostat did you make sure the bleed hole was...
OK so this mystery continues. I borrowed a neat tool which allows me to clamp microphones in various places on the suspension and listen to the...
Yeah that's no joke. My next house WILL have a lift in the garage and even still I'll be doing less of the heavy work. Too hard on the joints.
I had considered doing it in bits and pieces. It's just such a headache. But this is the problem you face isn't it? You have to wonder what...
Yeah OEM parts are just ridiculously expensive. Like $350 versus $60 for an off brand axle. But I've used Cardone axles on my Sienna without any...
I too usually go to RockAuto but I'm having trouble with some Cardone axle shafts that I purchased. I'll check Rock Auto again and see what else...
I'm getting a lot of dead links and outdated info on some old posts. Any advice on what would be a good source to buy OEM Toyota parts either in...
I'll give it a shake one more time. I did have it up on jacks and couldn't duplicate the sound even with it in gear and under load. This doesn't...
No leaks so far. I had replaced the seals when I installed the axles. The inner shafts popped out with a pry bar and a small piece of wood...
Greetings. I recently replaced all suspension components and brakes/calipers on my 2005 Prius. Control arms, inner/outer tie rods, sway bar...
Been so many good comments but I will add my two cents. This is definitely a do it yourself project if you are comfortable with a soldering iron....
THANK YOU!!!! Unbelievable! My part (I recovered all of it) doesn't have a part number but looking at the schematic my best guess was an air...
Thank you for that. I scoured those pages and didn't see anything that quite fits the bill. The one page that has arrows identifying different...
Not that I can see but part of a bracket which MAY have one side of the sensor fell into the abyss so I'll be looking for that. I did notice that...
I googled cylinder head temperature, water temperature, coolant temperature, and anti knock sensor and didn't come up with anything that looked...
