Separate names with a comma.
I am trying to mount new tires on the new rims and for some reason I can't. The rims are Dorman 939-259 15x5J, steel rims. The tires are...
I bought 4 new TPMS PMV-C010 sensors, which I am installing into new wheels. Is there a way to wake them up without using an expensive tool...
Is it possible to reprogram TPMS IDs with Mini VCI and Techstream software? I have 2013 Prius C One and need to replace all 4 TPMS sensors....
Here is my experience with replacing the steering rack on a 2013 Prius C One with 185k miles. Hopefully, it will be useful for someone. I was...
I replaced the steering rack because the car failed the state inspection. It is 2013 with about 185k miles. The inspector said that I have free...
I'll try with an impact. The bolt has some resistance because of grease in the joint. I also can cool that joint with crc freeze off right before...
I am replacing the steering rack on my 2013 Prius C One. The steering wheel is on center held by the seat belt. When I got the old rack out (by...
Here is my experience with it: Soaked it in PB Blaster, Liquid wrench, and CRC freeze off. Used about 1/4 of a large can of PB Blaster and almost...
I am replacing steering rack. Need to lower the cross-member. So, need to disconnect bar links. Driver side was ok. Passenger side nut started...
Thanks for the suggestions. The pic is new. Here are both sides. Driver side was relatively easy. On the passenger side the 6 mm allen key spun...
I was trying to remove the lower nut of the sway bar link on the passenger side and rounded off the 6mm hex in the center. Are there any...
Also, should there be a bush on the passenger side of the steering rack on this car? Like the part 45522-12040 (can't post the link to the...
I have 2013 Toyota Prius C One. It looks like I need a steering rack replacement (OEM part # 45510-52351). Is there a good video or tutorial...
Hi everyone, I have 2013 Toyota Prius C One. I failed the inspection, because of too much free play in the right front wheel. After looking by...