Separate names with a comma.
Isaac's post says it all, you would need a battery heater that at least kept the cells at 0*C (32*F) when stored and around 10*C when charging or...
I charged mine to 9v per module, but at a very slow rate, 0.5a which is a little less than 0.1CA. After reading this...
More progress. I've rebuilt pack one that goes behind the back seat and in front of the rear strut towers. Pack one plus pack 2 (to pack that goes...
Just to throw a spanner in the works, what are the studs made out of that connect the copper busbar inside the module through the plastic case...
Did the border protection people destroy the cells, or was it the long wait that resulted in them failing? At least the Australian wharf system...
Let's call it, checking the manufacturer isn't fudging the figures with both the cells and the balancers. I know the ZHC Solar balancers work, we...
Finally, kept the dash display working long enough to actually clock up the 750,000 kms [ATTACH] Wasn't game to go any faster while trying to...
Photos: [ATTACH] Marks where the rod contacted the cells [ATTACH] Partly failed burst plug [ATTACH] Burst plug went bang [ATTACH]...
At least I discovered how the cells vent. There is an aluminium cap with a thin centre section that fails under pressure or I'm guessing, heat....
If I'd been filming the pack strip down it certainly would have, with a lot blips in the commentary ..... A number of the 5mm stainless nuts...
Idea number .... lost count actually :lol: Pack 1 : 3 cells high x 3 cells long x 2 cells wide to fit between the rear seat mounts and the rear...
Finally finished welding up the box, went to put it in place and bolt a back seat in to see how it looked ..... that great Aussie-ism. yeah/nah...
I am interested in your Pistokehybridi set-up, what price and how much would it cost to post to Australia? T1 Terry
I read on another thread from yrs back, that the bloke pressurised the cell through the hole he drilled to re hydrate the battery and it took over...
I've read all the posts about how great the LFP cells are, so you must be mistaken :lol: Out of interest, what capacity cells and how long did the...
Yes, a hybrid PEV that can charge from the fast charger networks being rolled out and the ultimate aim is to be able to use the DC ultra-fast...
I'm about half way through welding up the top battery box. Haven't decided if it will be the base with a lid, or the cover with the cell mounted...
I've started welding the aluminium tread plate box for the top battery pack ..... mig welding aluminium isn't like riding a bike, it doesn't take...
This was yesterdays effort, sure doesn't look much for a whole day, but I had already made the base for the 48 cell, so I had to modify it .......
Thank you, at least this means someone has read it :lol: T1 Terry
