Separate names with a comma.
Update after putting the battery in the car. I have used torque pro to watch the module voltages. I have used the battery drain and fill process...
I have torque pro on my cell phone and an elm327 adaptor. I have setup a screen with the 14 banks voltages, Hi and lowest bank voltage, 3 temp...
I hope I am ready to put the battery back in the car I charged the pack to between 17.3 and 16.9 on all modules(forgot to take picture though)...
after 8 hrs discharge .5amp load , banks 1 to 14 15.3 | 14.5 | 14.7 |14.6 | 14.8 | 14.4 | 14.0 | 14.7 |14.6 | 14.7 | 14.7 | 14.6 | 14.7 |...
top balanced all banks to 17.0 to 17.2 volts left cells rest for about 8 hrs - all modules from 16.4 to 16.1 ran a 9 amp load for 5 minutes -...
Thanks for the info. One step at a time, I have disabled the plugin box, with help from the forums. I want to make sure I have the stock parts...
This is my first Prius. I purchased it because it also has a plugin option on it. We have 2 ford escape hybrids in the family, so I like hybrids....
I think the corrosion inside the prius is excessive too. I have disassembled 2005 Ford escape hybrid packs and they have no corrosion on them(well...
finally discharged all modules to 6 volts individually with hobbie charger. connected my home made bank monitor and connected my home made battery...
8 more modules to discharge to 6 volts. Since I had purchased a spare hybrid battery, I have extra parts. I decided to build a battery monitor...
Yes it is in washington state, he was close though, just one river away. :)
Thanks I am in the process of testing and conditioning the pack on another thread https://priuschat.com/posts/2676238/ but when I looked up the...
I have 2 bad cells in my pack from a 2005 prius starting with 092G Feb 9,2005 I have replacement cells that look like they are out of a 2008...
British Columbia, actually Burnaby
going to try a load test of the pack using my 2 replaced cells. going to hook up an amp meter and then a few switches and then switch in different...
back at the battery rebuild I have started cleaning the bus bars. overnight soak in vinegar, wash with water in the morning, then light wipe with...
I am interested in the reason for the water and salt? is it to make it safe to boil? Would straight vinegar not be better? I have tried soaking...
I used a 60 watt incandecent bulb to provide a .56 amp load at 168V(for 20 modules). To make a 10 amp load at 240V, I would need alot of bulbs....
removed the 2 bad modules, was hard to do, found out why, they were both swollen a bit. Don't think there would be any good reason to test them. I...
removed the battery today. I do have some corrosion on the bus bars, but overall I think the pack looks clean inside. 26 of the modules are 8.25 v...
