Separate names with a comma.
They shouldn't, the shim is installed behind the rear wheel hub. .
Probably just burned out bulbs. Passenger side marker bulb, and driver's side headlight bulb. .
Clearance is decreased, as expected. .
It's been cleared up, a putty knife to block the EGR path, no putty involved. .
My concern was that it allowed some volume of old oil to remain in the oil pan. I removed the valve at the end of the drain operation to allow...
I looked into that very thing when I was deciding how to best clean the EGR cooler. Ultrasonic transducers are available that could be clamped to...
I had a ticking noise after cleaning the intake manifold, EGR cooler, and EGR valve. It turned out to be a bolt I forgot to put back in at the...
My guess is that there was some leftover cleaning fluid or water from the valve cleaning that is getting into the cylinders. After cleaning my...
JB Weld on the rivets? What's the point, I can see if it were some kind of removable fastener, like a rivnut and bolt or screw, but a rivet...
If you do mostly short trips, or drive infrequently, then it is not outside the realm of possibility for the battery to only last 2 years. It's...
You might not get it response, this thread is a few years old. .
The carbon and oily gunk in the EGR cooler will laugh at your 3 cans of carb cleaner. [emoji16] .
Yeah, I replaced the EGR screws with stainless cap screws as well. I will never put those Phillips head screws back. Posted via the PriusChat...
Looks good to me. (thumbsup) .
The hot water is to dissolve the "soap" the sodium hydroxide converted the hydrocarbons/oil into. That's why the instructions in drain cleaners...
If you can find a rubber stopper that fits in one end. You can fill it with liquid drain cleaner, not the gel, at full strength. It is basically...
I agree, the coolant hoses are a nightmare to grip and remove, especially in the tight spaces around the engine compartment. I use a combination...
That's a cool idea. I have our pest control guys set out poison bait stations. Unfortunately, the rats and mice run off and hide before they die....
I would put the theoretically more efficient OCC after the Ruien type OCC. .
Yes, yellow is the better choice for fog. Less glare and less whiteout effect from white light reflecting back at you off the fog. Posted via...
