Separate names with a comma.
Yea the car doesn't really rev. I would assume that means it's got a rpm limiter at some ridiculously low RPM like 5000 or lower. I might have...
Will the transmission ever let the motor rev above a certain RPM?
As a car guy, I hate CVT transmissions. If somehow there was a way of making an automatic transmission less fun, a CVT is it. Prior to my current...
I used these washer-equipped bolts on the EGR Pipe-to-Intake Manifold. Not sure if that was the correct placement, but whatever.
Car is tagged and insured. Drove it in anger last night. Drove it to work this morning. No check engines lights. Still needs a new 12v battery....
As I was putting mine all back together I did notice some changes that could be made to make the removal of the cooler easier. Slotting the EGR...
Depends what you mean by "bypass". If you mean an uncooled tube connecting cat to EGR valve? High temps while driving. EGR Block-off plate? Might...
I'll let you spend that. I'll be over here with my few hundred dollar car and $20 OCC setup. We'll compare in a few years. :ROFLMAO::LOL::D
It'll be interesting to see how the EGR coolers look on OCC equipped vehicles after 50k. I also think trying to limit the blow-by via thicker or...
FYI I used oven cleaner and OxiClean and none were a single-treatment solutions. I also corked the ends. Someone suggested using a utility...
My EGR Cooler was so blocked that filling one end would result in NO water (or cleaning chemicals) flowing through. It took days of soaking and...
Chalk me up for another who encountered a stubborn EGR Cooler. It took two trips to the car wash, $15 for the pressure washers, numerous chemical...
I'm fine with emptying it often. I want to monitor it. It seems like the general consensus is that people aren't see a ton of collection anyway.
I'm thinking of mount my smaller OCC to the right side of the engine cover. Easy to see, easy to get to, more direct line of flow for the tubing...
I suspect these bolts are bracket bolts - where the EGR system mounts to the valve cover or similar. Reason being - all the other part nuts and...
So I stupidly piled up all my 12mm and 10mm head bolts in removing my EGR system and intake. Most of the bolts are identical, or obvious in...
Where are the most commons spots for the OCC? I'm hoping my slightly smaller option will give me a bit more flexibility to shorten the hose lengths.
The head on my 2010 is pretty cruddy, so the EGR Cooler/Pipe/IM cleaning will be well worth it. What also bugs me is the amount of crap around...
One more place in Phoenix: Steve Keith at PHOENIX HYBRID BATTERIES (602) 730-4967
Thanks Ray. I've connected with a fellow Northern Arizona resident who's got a Prolong and we're going to work together so I can rent it from him.
