Separate names with a comma.
19. The wiper assembly completely removed from the car.
5. Remove the plastic caps of the wiper blades using knife. Then remove the nut underneath and pull the wiper arm up and off.
6. Both wiper blades have to be removed from car.
30. Looking up to find engine block heater location from underneath car.
15. To remove the wiper assembly you must remove three bolts. Two are shown here, just to the left and the right of the wiper blade spindles.
16. Remove last upper right bolt in black washer
7. Remove the plastic outer edge with your fingers and small screwdriver to unhook 2 plastic hooks. This shows the edge trim removed.
18. Use pliers to remove plastic clips holding the wiper motor wiring harness to the wiper motor assebly.
28. Under the car you can decide to remove either the whole plastic cover or just open the flap on the driver side or left side of the car.
12. The outer plastic cowl cover removed after pushing plastic tabs in , removing plastic push connectors, and edge trim.
8. The upper plastic cowl tray showing plastic push pin connector that can be removed by holding outer ring on top and pushing pin up from the bottom.
29. I decided to remove all the plastic fasteners and take off plastic cover under car to have more visibility.
21. To completely remove the inner metal cowl tray you must fold down two plastic panels before removing the metal cowl. Look for the inner tabs...
20. Remove inner metal cowl tray by removing retaining bolts. Remove the bolts holding the metal bridge in the center too. This shows the driver...
22. This is the inner metal cowl or tray removed.
23. This barely shows the high voltage cable connector bolt location underneath the black wire harness. Make sure the car is off, the dashboard...
24. Once the high voltage cable connectror bolt is removed push the cable down and to the left.
32. This shows the engine heater core inserted into the block. To insert this heater core move the electrical wiring harness when underneath the...
4 Remove the front part of plastic cowl panel by pushing in the plastic tabs and removing the section of the panel.
27. You may see the heater core hole location with a mirror from behind the engine. The heater core hole is located on the right side of the...
