Separate names with a comma.
I wouldn't buy plugs or coils on Amazon or eBay for that matter; there are just too many counterfeit products on both platforms. Get the best...
That's not entirely true, once the battery reaches its full level (80% SoC), the ECU does indeed cut charging and regen but it doesn't leave you...
To confirm the manufacture date of the modules you will need to take a photo of the tops so we can clearly see the white writing and QR code as...
Once warmed up, the engine will always stop immediately when you lift off the accelerator. The only exception to this is when the engine needs to...
What does the Autel website state is the replacement for the AP200?
That image just shows the engine PIDs. There should be another 10 - 13 ECU/systems that can be interrogated. You may need to query the Autel...
Absolutely, yes. It would appear not. Or, maybe it is not installed correctly.
Ha ha, good luck with that!
It could also be that the ICWP (inverter coolant water pump) shorted out and blew the AM2 fuse. Just for the record, the "Key" button should be...
You're talking to a scammer. give them the flick ASAP.
Maybe the bulb is not seated correctly. Off-axis maybe?
Dr. Prius is not that good at math then.
Disagree. The difference in voltage between the highest and lowest block is only 0.13 V. The way the Dr. Prius app graphs block voltages...
The software can be downloaded directly from Toyota for free too.
There you go again, indeed. I have no idea what you mean by this. All you do is come across as ad hominem, xenophobic, ill-informed, and...
In my opinion, being critical keeps people honest. Being critical is not a negative thing – unless there is something that one is not being open...
No. Try Autel AP200.
You said modules correctly in the first instance, then pivoted to call the modules cells for the rest of the post. Modules contain 6 cells, so...
As TMP-JWAP said this is not an OEM clip but just looking at it I would use a small flat-head screwdriver to lift the central portion then while...
Correct it should go down, the orientation of that plate/bracket is actually counter-intuitive. The photo in post #4 shows the correct...
