Separate names with a comma.
The bottom of the license plate I put two pieces of the plastic 3M duel lock velcro. The stuff they use on the windshield Easy pass for the tolls....
I cut up a Prius driver side visor I bought on E-bay for $29.00. I also did not want to remove the detector every time I get out of the car. So...
Has anyone that got the TSB manifold done, has the problem come back again, after doing a known induced condition? i.e. 1.) Cooler temps, 2.)...
Exact thing happen to me. When I asked "What were you doing that you didn't see me stop?" she said "I was eating." I have two tiny scrapes of...
The light in the tray is added at the end of the plexiglass that has the shape of the tray. Anywhere the plastic is cut/scribed the light appears...
Excellent!! Looks very custom and OEM at the same time.
That is a very typical dealer response. Once the manifold clears up and the car stops shaking all sensors appear to respond normally by the time...
OK, I am revisiting the FM issue after some one mentioned there is power at the antenna. Since folks have gone to new radios, is it possible...
Rude person's, Your pride, in the product, with design and outcome is well justified. You hit this out of the park in terms of ride improvement, IMHO....
That straw and tape was not an option on my east coast 2011 prius II. I looked yesterday.
When in doubt, let it warm up. =)
So it went from the drive way, where it was washed, then you moved into the garage a short distance? The ICE never warmed up and shut off on it's...
I have the 2011. You would think the 2012 would come with the new TSB part applied to correct the old problem. Strange? I my experience last...
I remember now, my first car was a Chevy 77 Monza that came with a standard Vega 2.3 aluminum-block engine. That brings back memories. By the way...
Anyone have the 5k to 10K oil change on a magnet drain plug? I added a magnet plug and the collection of material from the oil is barely noticeable.
If it were me I would remove it and hammer it out as long as the plastic pin holes are mostly intact.
This is great info Gliderman. I will try it out this weekend. Thank you very much.
There's a great site that talks about air flow under the car. autospeed part 1 part 2
Update: I did my oil change 6K miles later. The magnet is holding up great. As a consequence I broke the big plastic pin holding the oil door and...
I agree, but with the battery as a variable it's never clear to me if the rpm value is to run the accessories and also charge the battery...
