Separate names with a comma.
Oil can come from the intake manifold and valve seals. Have you opened up your throttle body to see if there is any oil under the throttle body?...
Oil catch can Clean egr cooler, egr pipe, egr valve, intake manifold, clean injectors, install new spark plugs. Check oil level every week of...
Head gasket would be replaced by warranty, they are not responsible for cleaning anything until a cel shows. Head bolts were most likely changed...
Fuel rail spacer. x2 [ATTACH]
Blow-by can create wet fowling = misfire = knocking. Increased compression is caused by too much fuel(rich), oil or coolant/water in the...
Do you have wet oil at the bottom of your throttle body? Are your plugs oily wet, top of pistons oily wet?? Your engine is knocking from blow-by,...
Warranty would give you a new motor for a thrown rod/broken block. Other than physical damage to the motor, they will fix the car until your...
I have had my elm327 wifi wireless one for 5+ years and works great. I used it when I picked up the 2011 prius. I like how small it is and can...
The saturn ion may have a tighter engine tolerance (piston to wall clearance) and may have considerably less blow-by than the prius. It also looks...
Do yourself a favor and buy an elm327 bluetooth obd2 reader. 5~20$ on eBay/amazon. In the app store you can get obd2 software, some are free and...
Engine knock, too high compression, running rich, running lean, dirty injector, bad plugs, bad water pump. Has your engine had a rough idle/knocking?
Clean the entire pcv, egr system and intake manifold. If your prius was using that much coolant, replacing just the head gasket may not fix your...
I removed the manifold nuts, then studs.
I do not remember what bolt's I used to hoist the engine up. I know it was same bolts that came from the prius though. Maybe water pump bolt? I...
[MEDIA]
It would be better if it was brushless. I have milwaukee m12, m18 and ryobi tools @ home. This is what I would get next but I wish it had 150,...
Remove the studs from the block and you can leave the manifold in place. Look at my picks for reference. I used pb blast to losen them up. Cant...
Use a 1/2 electric impact gun, you will not have to brace the motor with anything. I recommend impact sockets for any removal of things torqued...
Pulley bolt, counter clockwise. [ATTACH] I used the ac compressor bolts to extract the pulley, thread and length were perfect. [ATTACH]
There are already people here that have said they have experienced better mpg with the catch can. Thanks MJOO for posting this. I too want more...
