Separate names with a comma.
Where do you get the ACC down there? How do we get that a pillar cover off? Is it just snap in?
Anyone knows where (preferably on the roof) I can get a +12v when the car is running (ACC) and no power when the car is off? I need this to power...
2016 uses the 14FBC I believe.
How does these new Prius foglight works? Does the bottom portion (3 lights) lights up independently as to the top part? Can both be on? [IMG]...
Does the ESS for the 3rd gen works on the 4th? I don't really dig the clunky shifter. [IMG]
Is the wiring harness already there for the auto dimming & homelink?
btw, if we just plug the 10ohms resistor straight into the connector, that should work too right???
Okay I got it done...not without a minor myocardio infarction. ImJP told you the wires are small...what he didn't tell you is the wires are...
edit: found answer.
ImJP Can we just cut out the whole diaphragm then solder the resistor in (more room)? Also can't find a 10ohm 3 watts so I'll use 30 ohms 1 watts...
You can also use ear plug. Lol
Awesome news. Btw I think you want a 10 ohm big resistor because the small resistor may get hot.
Thanks for the info ImJP Can we just cut up the speaker diaphragm so everything is still in place but it doesn't make noise?
I used Techstream to turn off the reverse beep (actually set to 1 beep) and disabled the seatbelt reminders.
Ahhh....I see. Btw if you're living in warm climate (like me, I'm in Houston), you may want to do a coolant to throttle body bypass. This is to...
I've never seen car with two coolant reservoirs like this one. What's the purpose of having 2?
I'mjP The thing you unplugged is the speaker. Looks like Toyota put a check in 2016. Will probably need to wire in a resistor to trick the ecu...
Lol. I'm trying to disable it. Is there an option to turn it completely off?
It looks like I was wrong. That is the speaker according to this thread VPNS speaker in different location on 2015 G3 + HID content | PriusChat...
Saw a post from vince22. He used the old Prius center cap from eBay and trimmed down the side tab to fit with 3M tape. I'm going with that route...
