Separate names with a comma.
Thank you Patrick for the specs, the engine is sealed pretty well and the cam cover comes off nicely as the rubber gasket is not flat but kind of...
Terry this was was my suspicion early on because on the 1st engine I could get 60 psi on 3 of the cylinders with a gage and hand cranking with a...
Thanks for the discussion above. My install is not yet complete but I have settled the question posted above by doing a simple leak down test....
I have a 2008 Prius that needs a donor motor. The 1st one I got from the salvage yard looked good over all but when I did a compression test one...
ChapmanF could you please give a brief rundown of what you do with a used engine? Tests performed and items you check?
OK I just watched a YouTube video about the Leak Down Tester. This looks like my next tool purchase!(y)
Thanks Chap, And I was able to speak with a Prius Gen 2 Engine mechanic, he said the that the Phaser without oil pressure will not effect a...
I do not have this this equipment Chap. I have a hose and a gage. The main question I have is will the Cam Phaser without normal operating oil...
On my Prius rebuild I have removed the engine with the ticking sound. I'm pursuing replacement. I found metal in the oil when I changed it. And...
Chap thank you for the detail. A tech I'm acquainted with has done this job and tells me it is not a terrible job for just the Rod Bearings, And...
This is a lot of ground that you covered ... Thank you you are correct, my understanding is very limited. yes Force Charge OK you are correct,...
no tech stream, just the Torque app and the Prius plug ins, and no dash codes still
All references are for a Hybrid battery All modules are within .2 volts I have actually put 2 "good" hybrid batteries in - same results. It will...
Recently purchased a 2008 Prius not running properly, the previous owner said it had a bad battery. I am able to drive the car up to 80 mph, but...
Thank you ladies and gentlemen for the comments. The ticking could be from a variety of sources, the knock sensor Georgina pointed could be it, I...
while I was in there the chain shows about 5/16" play up and down, the front of the motor is on the left[ATTACH] [ATTACH]
Patrick it sounds like my motor is mostly in-spec. I really appreciate the correct info. Somehow I got off track and thought that the spec was .005,
Question for an engine tech: would the gap values stated in the 1st post be large enough to cause the tick noise, keep in mind that there are...
276k
Ed this looks like a home run, all 4 of your points sound right on the money 1. Agree 2. Agree, Changing the shims, not a trifling matter 3. This...
