Separate names with a comma.
Here is a pic of the board. The connections that needed to be made to the board are: Green OEM fan Violet OEM fan Green CPU Violet CPU +12 VDC...
He probably meant to say "LCD" display.
I'd like one of these. How much is it?
Yes, the OEM fan is used. You can install the PCB anywhere you want but I put it close to the fan so the wires are shorter. I've thought about...
I received my scangauge II a few weeks ago because I had a fault light that needed to be diagnosed. I was always curious about the temperature of...
Has anyone been able to make this hack while the engine is running? According to Hobbit, it's difficult to do with the electronics powered up....
Yeah. A fan that needs a 10-20K resistor should cool the battery pack nicely. :nono: Bigger isn't always better;)
Huh?
I've read a few stories on here about how the battery fan was clogged with a lot of dirt, fur, lint, etc. I decided to take mine out and inspect...
It's funny you mention that. I know for sure that my engine is warm and the battery pack is not hot but yet it won't stop idling sometimes. I use...
Do you just confirm S4 by water temp?
I had these codes: P0003 P0004 C2D86 B0667 C2086 B0665 Then I cleared them and the red triangle and head light symbol were still there. I...
This is the exact problem I have - Red triangle and yellow headlight symbol. How can I confirm it's the leveling system?
I see what you're saying now. I can't remember if I stopped or not and I'm not sure if it was in S4 or not. If I understand your question...
I can tell you that the car had been running for 30+ minutes and I was climbing a hill. Regarding this incident, the light went away the next day...
Gotcha. The other thing is, the freeze data stated: RPM - 2742 TPS - 34 Loop - Open WT - 190 LOD - 57 IGN - 16 IAT H - 101 Shouldn't the loop be...
Could the sensor be the problem? If so, are one of these the scangauge inputs:
I got a hold of a scangauge today. My code is a P0420. Catalytic converter? How bad am I screwed?
Ok, so it should be 13.8 at all times? If true, seems like the battery isn't the issue but the additional current load is the real problem.
I used the display to check it. I could measure it with my meter but I guess I just thought that the MFD would be better since that's what the...
