Separate names with a comma.
I noticed that. I was just thinking how I could be more judicious with my braking style if I could use regenerative braking the majority of the time.
When you press on the brake pedal, how far down do you have to go before it starts to incorporate the friction brake?
I've seen and heard the stories. After looking through all of the information, the main reason why I won't charge the OEM battery is due to cost....
Well, Hobbit's information is really great. I was kind of hoping that I could measure RPM from the crankshaft position sensor but his information...
Does anyone know how many teeth are on the gear that the crankshaft position sensor reads?
I have the schematics. I can see where the IGF wire goes to and from. I can measure frequency. My only issue is that the value doesn't seem to be...
Would the crankshaft position sensor (pins 33 and 34 on E-4) be active when the engine is spinning but the engine isn't "on" or injecting fuel?
I have my Fluke DMM hooked up to pin #23 and chassis ground. When the engine was on (idle) I got about 50Hz. It would fluctuate a lot and...
Ok, so I did this but it isn't working. I hooked up my Fluke DMM (positions 9 and 10) and I got squat. I also checked the positive wire to chassis...
Ok, so it's not the same one then. The EV mode wire goes into the HV ECU. That would mean that pins 9 and 10 are on the ECM to the left, with the...
So it's the same plug that my EV button is installed into?
.
Great information, thanks. Just one question. I'd be more than happy to test this out on a Gen II but I'm not sure what set of connectors E-4...
I think both fluids are in the same general area but I hope they didn't mix the fluids up! What a bunch of morons!
I went to go do this just now and there are no warning lights on my car. I guess there must be some type of check where if it doesn't see the...
Thanks for the reply. Is this in the back at the battery itself or in the engine compartment?
In my infinite wisdom of tinkering, I managed to set off the red triangle and check engine light. I must have touched wires together near the...
What is the easiest way to know that the engine is spinning? I know that above 41 MPH it will but how do I know if it is at other times? I...
That is interesting. I wish there was more information on that. I keep coming back to the idea of a charger that would output anywhere from...
Would a 200mA indefinite charge at 200V damage a NiMh battery? The thing I can't understand is that charging the stock battery seems very...
