Separate names with a comma.
Some pics of the cover back on. [ATTACH] [ATTACH] [ATTACH] [ATTACH] The painted parts look ok to me. Main thing is it hides the gaps between...
Painted the underside of the polycarbonate battery box cover today. The black areas will hide the gaps around the battery box and some of the...
356 km done so far in ev mode. Average is 14.31 kWh per 100km. Jason.
Another week of ev commuting done. This is the average battery I have left after each days commute. (37km.) [ATTACH] I have the EV grin once...
Looks like the teething problems from the bms are now sorted. Did a 42km drive today work trip plus a short side trip and used 28.5ah and 71% of...
So far I dont think the pack has been warmer than about 30°c. It's not appreciably warmer than the stock HV battery after an 18km drive. I...
Did some work in the garage this afternoon. I have setup some remote monitoring and control of the car charger. I used a Belkin wemo insight...
Have had some small issues with the BMS but this now looks to be sorted. I did another work commute today and used 5.645 kWh from the wall for...
So. First 38km work commute is now completed in ev mode. No issues. i won't know exactly how many kWh I have used till I do a full charge...
First full charge with a top balance just completed. Took around 5.5 hours. The last few hours the charger was putting in less than an amp so it...
So, with huge thanks to John I finally have a PHEV Prius once again. It's a longish story. Had planned to get the car completed Easter Saturday....
Does anyone have a diagram for wiring this up to a 2006 Prius ? I'm considering buying one and want to know how and where to hook it up....
You mean like this one ? [ATTACH] Not exactly a Toyota one, but I like the way this one blends in. Jason.
The cells are in the box so tightly that they can't move. In fact it was a real struggle to get them to fit in. There is no way they can move at...
I have got a tracking number now for the required cell interconnects and hopefully in 10 days or so they arrive and we can get the install...
With much thanks to John, we got a lot more done today. Didn't manage to finish the job though. Ran into a few problems. The vendor that I...
Granted it's not all about brightness. The leds I used are actually multi directional. There are led chips mounted all around and on the end. So...
I have replaced almost all outside lights with led lights. The only remaining normal filament ones are the headlights and the front parking...
So, did a little bit of other upgrades tonight. Added led lights to the door courtesy lamps And number plate lights. The before and after pics...
It should be ok with the cell modules, as I had the same ones in the last system with a lexan lid and there were no issues there. I sure wish...
