Separate names with a comma.
I have it narrowed down, I think, to three LRR options: 1. Yokohama Avid Ascend (T-Speed Rated) - Highly rated, there is a $50 rebate now (as...
Any word on the Michelin Defender T + H? How about Continental TrueContacts?
Hi all, a chunk of rubber was recently gouged from the sidewall of one of my 2005 Gen 2's Michelin Energy Saver AS tires. Likely from a curb...
I successfully replaced the blown OEM JBL with the new GT7-6. I actually just left the other good OEM JBL installed in the passenger door, because...
Answered my own question - I ordered a pair of JBL GT7-6, am going to install myself.
Valde3, I bought these before you posted - will they work? Amazon says they fit my vehicle. They look right. And I believe reviewers said they...
Hi all, I want to remove the front drivers side door panel, to be able to swap out a blown JBL speaker with a new speaker. I have a 2005 Gen 2....
My 2005 Gen 2 has a blown front driver's side JBL speaker. Can anyone advise best options? 1. Would an Infinity primus pr6500cs be a good...
Yeah, zip ties. I imagine I have to drill new holes somewhere in the silver plastic, to thread the zip ties through and cinch the black plastic...
The black plastic undercarriage strip of my 2005 Gen2, which attaches to my front bumper, is falling off. It normally attaches by three screws,...
I was able to successfully siphon via the dipstick guide tube. The dipstick now reads just below top dot. I pulled what looks to be around 1/2...
Thanks again everyone. I will, therefore, try siphoning via the dipstick hole. Stevewoods, thanks but I don't have a good setup to be able to...
Thanks again - I see people doing this exact procedure on YouTube via the Dipstick hole. So that will be my first option, unless someone else...
Next question, assuming the tubing isn't too thick, would it be better to remove the excess oil via the OIL FILL hole, or via the DIPSTICK hole?...
Thanks Mendel. I ordered it. According to feedback/questions on the Amazon product page, the tubing has a 1/4" outside diameter, a 1/8" inside...
Thanks Mendel. However I can't get under the car, I'm not set up for that. Wouldn't that large syringe I mention above do the trick? I just saw...
Hi all, just had my oil changed on my 2005 Gen 2, and the dipstick shows 5/8" over the top dot. Is this a problem? Based on my oil bottle, I...
Uh, ok. Is it me, or was that unnecessarily offensive?
Yeah, I wrestled with the decision for a bit. We'll never know, really. But as long as my battery performs well, that's good enough for me.
Just got back from Electron, and I am very happy. This morning I spoke again to Chris, who called me with a choice between his two best...