Separate names with a comma.
It is possible that your Enginer converter maximum voltage setting is now too high. This causes the OEM battery to overcharge. When the SoC gets...
Got the thumbs up on cost effectiveness for this project!! I have added some more PID values to my Canview_V4_BMS+_XXXXXXX.bas file. I have...
That is correct. I am not allowed by law to distribute my version of DMbasic. In your case you have to add line numbers to my canview.bas program...
I have managed to get PID requests to work. The problem is that the request needs to be sent more than once. Maybe JDH2550 could explain why. This...
Need to use "HIDbootloader" to flash the Duinomite Mega. Need to flash "DUINOMITE.hex" and Need to flash "DMBasic-2-16-2012.hex". It was a long...
It was a long time ago. I cannot remember. But you need Dmbasic V2.7B which supports CAN commands. mmbasic does not. Bit of a shit fight between...
Yes, latest code is always found in first post of this thread. It is also dated.
I have not got around to sending PID requests yet. I will soon. I have been successfull in sending a PID 556 to the BMSplus to change the end...
You can also try a cheap version of the Canview using a Duinomite Mega see My Duinomite Mega Canview V4 equivalent Project | Page 3 | PriusChat
The good thing about the ready signal is that when it is not ready you can load a sleep program i.e Sleep.BAS which just loops until it gets a...
Due to also indicating the accessories position I am pretty confident it is the ready signal. I do not really want to cause a serious DTC, too...
You can program whatever you like using mmbasic if you think you are better than a 12 y.o. Kid. I think it is speedy enough. It is included.
The results are in on the Prius READY signal. PID 038 byte 0 = 192 or B 1100 0000 when ready = 128 or B 1000 0000 when in accessories 2...
Thanks. I will have to check that this signal is not high during accessories 1 or 2 position. If so then it probably is the ready signal. Then...
Does anybody know of a PiD that is broadcasted (not requested) on the Canbus that shows the ready signal. A remember pEEF was talking about it.
[media] [media] If you can play the YouTube videos in slow motion you can see each value go blank just before being updated and you can see...
I was just thinking on the issue of PID updating. Some PIDs are sent every 10ms and others are sent every 100ms. Maybe if we programmed a...
My two converters are inside a grounded box so noise is kept lower than compared to having the converter with no box. So the open architecture of...
It only has 4 analogue inputs 0 to 3.3v with +/-10% accuracy. Not enough to do voltage protection for 70 cells.
For some unknown reason my Duinomite Mega is causing my Prius to go to what I would call safe mode (no acceleration) whilst driving. Accelation is...
