Separate names with a comma.
Sounds good as long as it speeds up the updating.
I have taken on the program style of HSI.BAS and adopted it to my latest CanviewV4_BMS+.BAS. I have found a few bugs. Still working on it. This...
Hi JDH2550, Due to having two Enginer kits I get a lot of noise. The Canbus data going to my Duinomite is sometimes corrupted by the converter...
I overlooked that bit. Thanks. It has been edited.
I received my OBD2 splitter today and the results are in: The PID request 7E2 02 21 C3 according to what my Canview V4 is saying is: Header =...
I also have a ScangaugeII. When my obd2 splitter cable arrives I will be able to see what the Scangauge puts out on the Canbus. I could fool them...
Thanks, kudos to you too, looking forward to seeing your improvements to my Canview.BAS file....
Our expert programmer JDH2550 is working on it. If he cannot get PID requests to work successfully then nobody can.
JHD, You forgot to mention to FWD that the eMega uses a stereo plug for a Canbus port which was giving you DTCs. When you plug in the stereo plug...
Yes, basic uses toolchains which is slow but it is necessary so anybody could write their own simple code. You can write a faster program in C but...
At least one relay is needed to drive a PHEV contactor to connect my A123 lithium pack to my OEM HV battery. In which case you also need a BMSplus...
It is low priority on my to do list so I will do it eventually. I have just finished putting together my relay box together with cables and plugs....
Good news the HV battery fan command already found.
Just received delivery of my 4 relay module. I will be wiring it up to a DB15 female plug to make it compatible with my Canview V4. Makes it...
Thanks. I have done some searching and cannot find anything specific to 07. It is probably Toyota intellectual property. The only significance I...
Hi JDH, I cannot get my PID requests to work with my Duinomite Mega using DMbasic. Let me know if you can. Thanks.
It updates the volts and amps quickly so I doubt that if the device is slow. However if it is the DMbasic program is slow then I may have to start...
Great. I hope to use mmbasic 3.2C soon. Let us know when it is available. Thanks.
Yes, but I will be leaving out the manual part of just sending SoC which is too dangerous. I have tested the DMbasic code and the PHEV/ORIG button...
Thanks. What is the significance of "07" in 07E2? does it mean PID request?
