Separate names with a comma.
I agree with Bisco, that sounds very much like a 12v circuit problem. When I was limping my '06 Prius to the workshop, I hit a bump and the whole...
Sorry, I didn't that you for posting that info, much appreciated. T1 Terry
That's interesting, even the same colour as mine :eek: I at least got the fire out before and actual vehicle damage occurred and well before it...
Are you just trying to make me feel better :lol: When the traction battery was on its last legs in the '06 Prius, I did see 280v as battery...
I thought I posted a reply to this, but it must have gone off to the ether or some where. I'll try again. That is handy info, thank you, roughly...
3.3v is somewhere between 90% SOC and 50% SOC ..... if the cells hold 3.4v or better over a number of days, then you have achieved full charging...
Been extra busy working doing lithium off grid installs, it's put these "projects" on the back burner. With the single cell, I tried a number of...
This is just one of the "E" fluid cooling ideas out there, a lot of player in this new market...
The "E" fluids were developed especially for battery and motor cooling in the F1, Formula E and other race type vehicles where the battery gets a...
I plan to build a 55Ah LTO battery for my Prius that had the traction battery go up in smoke (and flames and bangs and pops) It will take up the...
A very interesting experiment. I steered away from using LiFeP04 (LFP) chemistry because they don't handle anything much more than 1CA charging...
With the NiMh chemistry, the actual cell temperature can be measured better than the LFP chemistry, so cell or module temp plays a bigger part....
The LiFeP04 (or LFP for short) are the chemistry of the extended range cells in the "Engineer" set up that was in the car when I bought it....
You'd be right *issed if you spent all that money and it wasn't any better than a bad battery eh :lol: The real issue is, will it hold a higher...
I haven't built it yet ;):rolleyes::LOL: T1 Terry
Sounds a lot like our taxi Prius. Fitted a s/h hub from an auto dismantler, lasted about 500km before the noise fully returned. Ordered some...
I have separated one cell from a module .... took a few goes before I actually got one out of the plastic without pulling bus bars that much the...
I wonder how much rubbish collects in the sump of each cell ...... maybe a drill hole in the centre of the base, a drill hole in each end of the...
:lol: The theoretical compression ratio for a Prius ICE is around the 13:1, but do you know what the actual running compression ratio is? If you...
Seriously, if you can't identify the difference between water damage and something in the fuel that is causing that corrosion, maybe you should...
