Separate names with a comma.
When flying planes at night it's a different story as there is *no* light up in the sky and you need every ounce of your night vision to hope to...
This Page by Hobbit may be of use. It's the best documentation out there I know of, but you don't need to do everything he does, such as the...
On Topic: You get in another car and keep reaching for the EV mode button (it's habit now with the PHEV!).
Yes, this is programmable, and differently for the smartkey, the fob button, and the mechanical key. This is the wrong thread for this though,...
I had a look at the Gen I battery ECU, similar functions but implemented way less efficiently and much higher component count. I don't see the...
Thanks Dan, Keep us posted! I've already tried and failed on my '08. If anyone reads this and has gotten them to address this on cars not...
Race conditions are not unusual at all in systems like this when you start going out of bounds on the design parameters. Take any modern...
I agree, get a second opinion at least Don't tell the second place what the first one said either.
Yes, you can peak numbers like that, but the average maximum is about 20kw. (gen II) You wouldn't be able to sustain much more than that without...
Intermittent connections in the MFD can cause all kinds of bizarre results. For instance it may not be the simple pull-up line you describe, but...
There are tons. I recommend an Optima. Search is your friend!
Uhm, I've already advised you of this. The Lights are the same wedge-based 194 bulb type. They need to be side-emitting for best effect....
This is due to bad connections (solder joints) developing in your MFD unit. It can be repaired by someone competent with SMD rework. This...
Ken, do you know what the Gen III can do? (kW)
Yes Ursle is right, there is a low battery warning that will cause the system to beep when the fob tells the car the battery is getting low. This...
Good point, Could be the security. The pulsing is likely the Smart key system sending out it's 134.2khz interrogation signal. All cars have the...
I've had success soldering, but if you did and this didn't work, maybe you should try without it. You don't need to make it look like factory, but...
I have this in my 2008, which is not covered by the TSB (it specifically only mentions 2004-2007). Even though I can demonstrate it upon demand...
Another good idea would be to order some high-quality LEDs to replace the bulbs. Lately I've seen an awful lot of low-quality bulbs coming out of...
None of the charging systems I've seen, including the Gen II THS charger can do individual string balancing. There also is no need as long as you...
