Separate names with a comma.
Keep in mind the fuel pickup is not at the very bottom of the tank. There will always be some fuel you simply cannot use! Do not plan on using...
All the dealer is going to do (if you are lucky) is look for DTC codes set. If you don't have MIL illuminated, they will tell you your battery is...
Disclaimer and Warning: I don't recommend anyone attempt this mod unless they are experienced with electronics and in particular SMD rework. All...
The steering wheel is what started it all. The original LEDs in there were so dim I'm not sure why they bothered. Now they are so bright it...
That's the open-circuit voltage. It will indeed sag lower. I do not use voltage as any kind of SOC indicator, I count coulombs. I didn't cut...
FYI Toyota calls the ICE ECU an "ECM" (Engine Control Module) and the "main brain" in the Gen2 is the Hybrid Vehicle ECU or HV ECU, but I guess...
I haven't really looked at a Gen3, but I have spent some time with a Hybrid Camry which I've been told is similar. In that car they have...
After settling several hours after the charge, my trips start out at about 255v and then slowly run down to 235v. I clock about ~25ah out (10%...
The A123 cells have a nominal voltage of 3.3v, and I complete my top balance at about 260v. I did some experimentation and found the Prius works...
My car was never equipped with Nav, and the Map button isn't available anywhere on the CAN bus, so I went "old school". Amazingly, there are a...
At some point I'll shoot some video, but I'm low on spare time right now.
The shunt balancers I'm using are all safe and will never dissipate enough current for a fire. They simply allow top balancing. You are more...
I recommend replacing all those little horrible bulbs with blue LEDs. They will last forever, be easier to see, and look WAY better! The power...
No, I haven't contacted them. Feel free to if you like though! (not enough time for such things right now)
Warning on the Tactrix, I have one and it works great for TechStream over CAN, but has a timing error (we think) on the KWP bus, so it cannot...
There should be some historical codes set they can pull with TechStream that will help diagnose the cause.
Sorry, In my haste I somehow read that you were going to fit a liquid-to-liquid heat exchanger in the system. If you preheat the air coming into...
Yes, the 40's make more sense. I've seen peaks of up to 140A, but that's rare. Generally it will hover around 100A continuous on the highway,...
I've been asked this quite a few times already, and I *might* do this in the future, but not at this time. I will however share my methods and...
Interesting. They implemented a nice looking graphic LCD, but didn't add any analog functionality! Having the bar-graph is a major part of the...
