Separate names with a comma.
I installed my VG shark fin on my 2012 "v" in April 2012. It's been there since than with absolutely no issues. First, I made sure that the...
Unfortunately, it has always been "caveat emptor." The only way to really know that it is done right is to check it and to verify it for...
Yeah, one of them born every minute. Today, with the internet and computers, they clone them by the drogues.
The oil pan is fabricated with a M12x1.25 nut welded to he inside of the sheet metal oil pan. Drilling out the nut and rethreading it to take a...
That's why I do my own oil changes.
Honda or Mitsubishi plug is M14x1.5. Drill out the hole with a half inch bit, and tap with a M14x1.5 tap. The Honda/Mitsubishi plug uses the...
I'd go with Lucious. The transmission needs to be drained and the fluid replaced.
Nice thing is that the 2012 "v," like mine that I got in Feb. 2012 is the same car that is available in the 2015 model with almost no changes....
The Prius"v" reverts to placing the shifter back on the dash where it really belongs to save space. The "box" behind the lever takes up a lot of...
I found these Canadian made Scepter ramps to be the best deal for the price. [MEDIA] They are much better than Rhino ramps, either the old or...
You probably burned out a large fuse or fusible link. Also, check the voltage of the 12 volt auxiliary battery.
If I were designed it, I'd use the components and circuit of the aftermarket shifter, but with the current shift pattern and an "h" shaped ridge...
I used to work at the San Ysidro Border Station. "Cut and shut" cars are popular in Mexico and third world countries, because safety regulations...
Given the large size, weight and space that the two Hall Effect sensors and the X-Y stick and bearings take, it would be more likely than not...
Would you buy a motorcycle helmet that has been in a crash and refurbished? Cars are different than they were 50 years, ago. They are no longer...
Yep; exactly. It includes the software. That's how I did mine. No issues.
YES!
Being the worry wart that I am, I purchased an additional oil filter cap as a spare. If you break the original one, you're "dead in the water."
Some are marked 64, while other marked 65 mm, will fit. The only real way to know is to try it on a filter cap. While quite expensive, this...
This one works; [MEDIA] If you go to the auto parts store, just make sure that you get one that is 65mm with 14 flats. I saw one made by Great...
