Separate names with a comma.
Wow, that's a cool hack NuShrike. Very futuristic to replace hardware (EQ) with data! What volume level were you listening at?
Newsflash: the JBL system does change the equalization based on volume setting. I added lots of measurements to my document at:...
There is an ACC wire to the JBL amp that is on whenever the car is turned on. All the info on what wires are what is in here:...
Good question. It's held on by two black plastic clips. Since nobody ever sees that part of the car under the seat, I just pried them off with a...
Cool to have a rep from JL available like that! Another issue to consider is that the signal to the amp might be balanced (opposite signal on +...
This B Quiet Ultimate stuff sounds good. I used Dynamat Original on my last car and after ten years the adhesive was beginning to fail and it was...
Good explanation Wilco... you are ahead of me on that one. I used to get really concerned about such phase shifts because it's something that can...
There are apparently two issues with beeps and aftermarket audio: 1. If you bypass the JBL amp completely, you won't get beeps at all since...
The navigation and the bluetooth phone both use the same mini amplifier inside the nav unit, if you used the center for one you would also have to...
FireEngineer, the sales note off the link above says: "Another unique feature of the LC6 is sumable outputs. This means you can take multiple...
Hi NuShrike. Thanks for doing the graphs to figure out the front channel response when you calibrate off the rear channels with the CleanSweep....
This is a great install... particularly like that sub enclosure. If you've got to have a sub, that's the way!
Has anyone found a source for connectors that could be used to tap into the inputs/outputs on the JBL amp. There are two connectors on the amp,...
Hey, does anyone know what the voltage of the analog left/right signals that drive the amp is? I'm really starting to think that tapping that is...
Wow, that is really clever! Great idea to put the cleansweep before the JBL amp if possible. Solves the volume issue and removes the need to...
Wilco, I'm not sure I understand your comments about the bass being a problem. What I was contemplating was basically using the rear speakers as...
The prius JBL amp heavily EQs the signals in such a rather nasty way, as shown in graph 1 of: http://www.tom-morrow-land.com/tests/priusaudio/...
FourOhFour, I wouldn't simply replace the front speakers because the signal to the woofer is low passed and the signal to the tweeter is high...
Re: Looking to upgrade the JBL "premium" speakers. Hi Wilco. Thanks for pointing out that the peak is at 70Hz not 80Hz... I was reading my...
The more I think about it, the more it seems to me that bypassing the factory amp would be the real solution. Adding more equalization to...
