Separate names with a comma.
thanks. some great numbers there. my daily commute is only 35km round trip. and im finding that i am using about 3.5kwh a day from the wall....
i would buy a set too, if i could get them shipped to Australia :) summer temps here can be brutal. over 40c in my area.....
i wanted to post an update after my first full week of commuting and a few short trips here and there... so the numbers are in, and those...
just got home from the first city drive with the kit installed and running. i have 579km on this tank, of that only about 180km have been with...
thanks. i donated the old gear to the person that helped with the install of this new pack / charger / bms. 4kwh is plenty for my daily needs...
ok, im back home now :) here come the pictures.... so, Day two begins with bolting the cells together and installing the cell modules......
For the bms I am using, if there is a LVC trip, I have to manually reset it. It will not allow further discharge or charge until the bms has been...
Ok. So after another 8 hour day it's finally finished and working well so far. I won't have access to my pc or Internet other than my phone for...
were using the contactor in my system to disconnect the pack from the input side of the DC-DC converter. not the output side. so the loads will be...
ive been doing some thinking about the use of the contactor. im now wondering if i will also need a precharge circuit ? to prevent arcing...
We had to use the contactor, as the DC-DC needs a NO type contact for it to be on. The contactor that I have is NC when the BMS is on. So I...
so, the story of today begins at around 10am, when i arrive at Vincent's place in Woolongong, some 1 and a half hours drive from home. we start...
update here for the info on the BMS16d 2 pin connector. [IMG] [IMG] Vincent took the opportunity to disassemble the BMS16d and inspect he 2...
Just got through with Day 1. Lots of progress made today. Once I get home and can upload the pictures, I will update again. Very happy with...
link to new thread.... Enginer PHEV kit Rebuilt with quality components and new batteries | PriusChat
that's another possibility too i guess. we will investigate the options tomorrow once the parts of the old kit are removed. Jason
yeah, there isn't a temperature monitoring provision, unless there is temp sensing on the cell modules (i don't think there is) total cost has...
hi all. a little background for those who may not already know. about 2 months ago, i purchased a second hand 2006 prius Itech, that already...
all of the parts i need have now arrived. the install will go ahead tomorrow. i will start a new thread when i get home after the install. the...
he seems to think it will be a NO type deal, but said he will investigate more fully once we get going with the install.
