Separate names with a comma.
Cleaned and ready to bolt on. Will ship for free, within the continental United States. Also fits Prius V.[ATTACH][ATTACH] [ATTACH] [ATTACH]
He's using the same routing as mine and I'm not having any problems. I suggested using a garden hose to verify flow through the exhaust heat...
My post#7 on this thread covers that. Red and purple wires are swapped. Post # 14 covers this and the MAP sensor wiring changes.
Actually, this is the way I did it. The cooler gives you more leverage to get it just right. Bolt everything up loosely, heat it up again and...
Yes, I used the gen4 dipstick, had to bend it back slightly to clear the gen3 air horn. Didn't try the gen3 dipstick.
When I changed to the gen4 wire looms I found enough extra wire.
I would too, but $450 is to much, for an experiment. Did find the headpipe and catalytic converter on eBay for just over $100, so may go that route.
Excuse my poor penmanship, should be temp. sensor/ bleeder. Of course, Toyota got rid of the bleeder on post 2010s.
Had a new set of gen3 plugs and with 94,000 miles on the gen4 engine, it was time for a change. I compared the plugs and the tips looked like the...
This is how I connected my hoses, with gen4 egr cooler. What gen4 parts are you using?[ATTACH]
I'll try to pop the hood and get a comprehensive list of all the modifications I made. Off the top of my head. 1. Add ; Do this before installing...
Really don't notice any changes in power, the electric motor provides most of the torque for acceleration, anyway. Just runs much smoother than...
Cleaned intake manifold. Did the gen4 to gen3 engine swap with gen4 intake and egr, so no longer need. Prefer PayPal, will ship to continental US...
Cleaned, ready to bolt on, egr and cooler. Will also fit Prius V. Prefer PayPal, will ship to continental US for free. Did the gen4 to gen3 engine...
Update, fixed a drivability problem with the help of Sandog58, who happens to be doing the exact same swap. Had to swap the red and purple wires...
Had time to sleep on your 3190 code and think I found your problem. I had to reuse my gen3 throttle body on the gen4 intake so I'm thinking the...
A picture of the repinned plug would be helpful, I'm having a less severe misfire issue(no codes, just a part throttle surge) and I think that...
I also have completed the swap, using the gen4 egr and intake. It's in the gen3 technical discussion, not sure how to link it though.
We are very like minded, I was doing the exact same thing at basically the same time. My post is in the gen 3 technical discussion, so I don't...
Yes and it was pretty clean inside,just a light carbon coating, which brake cleaner easily took care of. I wish I would have taken pictures, but I...
