Separate names with a comma.
No, that's not the PCV valve hose. The PVC hose is down lower on the crankcase. It connects directly to the intake manifold, after the throttle...
You need a new or used headlight assembly. There is no replacement part, it's glued or ultrasonically welded on. Posted via the PriusChat mobile...
You should limit your jacking on the pinch welds to the factory recommended locations fore and aft, where they are reinforced, doubled and crimped...
I like the teardrop shape of the mating surface where the o-ring seals. That will "direct", along with good ol' gravity, a nice stream of oil...
Or, you can pick up a EGR cooler from ebay and clean it out before taking the one on your car out. This allows you to take your time without the...
The epoxy and fiberglass cloth is a tried and true method. The only unknown is whether you can get adequate adhesion/bonding to the plastic...
I put these on our 2011 Prius and our 2014 Corolla. Here you go: For Toyota Lexus Oil Filter Housing Cap 15620-40030 & Plug Drain 15643-31050...
I've seen repairs made on the backside of the cracked area. Scuff up around the area extending several inches on each side of the crack, and...
Get one of these, and replace the plastic filter housing with this aluminum filter housing at your next oil change. Much lower cost than the spin...
My point is that, it is recommended to change your oil at 5k intervals, even if you are using synthetic oil for higher mileage cars. Posted via...
You're already starting to burn oil and still you're considering extending the oil change interval to 7k? [emoji848] Posted via the PriusChat...
What about the EGR cooler? No pictures of the dirty one that was taken off the car? .
Should fit, no problem. .
Regarding the improperly mounted passenger headlight bulb. You are truly lucky if the crooked bulb didn't melt the plastic mounting area on the...
If you are passing oily residue through the tail pipe then your catalytic converter will be shot, if it isn't already. Has it started burning...
I installed Innovited 35w AC HIDs/ballasts for our Prius, but hated their bulbs. Purchased bulbs from China from CN-Light that were premium...
Looks good, I did pretty much the same about 5 years ago on our 2011. Also went with 4300K 35w, but made sure the ballasts and bulbs were DC vs AC...
Get long nylon bristle brushes meant to be used to clean stainless steel drinking straws. Sold at Harbor Freight and Amazon and anywhere that...
I think you are confusing the main intake outlets with the much smaller egr outlets in each oval intake outlet opening, which is the large ovals...
And this is what the spare EGR cooler I got off eBay looked like before I cleaned it. Unknown miles on it, but I would guess that it was from a...
