Separate names with a comma.
If the OEM wheels on the Gen 2 are the same as the Gen 3, then the offset is 45mm. An offset of 35mm means that the wheel face will stick out...
Finding room for it will be a challenge, the Provent OCC is very large. .
Don't know if I posted this in this long thread, but I mounted my OCC between the engine coolant reservoir and the engine. There's quite a bit of...
I don't know about all the other things in your post above, but I'm fairly certain that the highbeam bulb and plug is the same H9 as the original...
You should have asked for the old egr cooler and intake manifold be returned to you. Same with the EGR valve and pipe. Those can be cleaned...
OCC shouldn't affect how loud the engine runs. Check for vacuum or gasket leaks, loose screws/bolts/clamps, hoses not reconnected properly....
What year is it? How many miles on the odometer? As stated, there's always a pool of oil in the intake manifold, under the throttle body. While...
That's a really good price for the EGR cooler. I got an EGR valve and cooler off eBay for about $120, if I recall correctly. The cooler was...
Use the link provided above, wheel-size.com to compare the wheel specs between your stock oem wheels and any that you are considering. Posted...
Just heard identical sounds today on our 2011 Prius after running the car for only a few minutes with the AC on to check all the signal lights and...
Part numbers are 53851D (RH side), or 53852B (LH side) for the fender extension, diverter things. The part numbers for the fender liners are the...
The Prius v has a relatively common 5 x 114.3mm bolt pattern. As mentioned, Camry wheels will fit fine. Also, Rav4, many Nissan and Mazda wheels...
Edit, removed
It's number 14 in the diagram on this listing:...
Sorry, apparently the small corner piece comes attached to the fender liner, so you just need the fender liner and the diverter. Posted via the...
Yep, you're missing the entire fender liner, small triangular corner undercover, and air diverter thing that attaches at the triangular corner...
I don't see any pictures in your post. .
Probably forgot to put one of the gaskets in place before assembly. Or, didn't properly tighten one or more nuts or bolts to spec resulting in...
The catalytic converter gets very hot, the shield is there to prevent setting fire to combustible material like tall, dry vegetation, if you park...
FYI, that part comes off if you install one of the commercially available catalytic converter anti theft shields. I've got our original heat...
