Separate names with a comma.
I guess I must have been hearing the clicking of the OEM relays. My EV200 makes a lot louder click. So I could not tell the difference between...
Hi JDH, Are you just using the OBDII port for analyzing data? Right. Can you intercept Canframes through the ObDII port. I did not think that is...
Today I installed a small 12v battery charger so the auxiliary battery is charged at the same time as the PHEV kits are being charged. Read how...
My contactor does not make any noise except when it closes and opens when I power up or shutdown or when I press the PHEV/ORIG button on the...
Just figured out that my Canview V4 shows these two CANframes on the raw data screen as they are being updated live. Thanks Norm. The updating is...
At US$1600 ea. For a PIS ECM assembly. When you can buy a AVR for US$300. Why not reinvent the wheel.
Norm's BMSplus is designed to spoof the SoC. The high modified SoC tricks the HV ECU into allowing more electric assist and maybe less ICE. Your...
There are five warm up stages I believe. Try this post http://techno-fandom.org/~hobbit/cars/five-stages.txt Or this one...
Mr Frog can you post some pictures. then maybe we can help.
I am starting this new thread in an attempt to decode the 0x348 and 0x3C8 as described by pEEF at this post - Update and technical details on my...
The interpretation which is a bit vague comes from pEEF's post here ... Update and technical details on my PHEV project | Page 2 | PriusChat I...
I have been doing some work to try to find out what the two can frames 0x0348 and 0x03C8 do as described by pEEF. I used my Canview V4 serial...
Your open source project could one day become a small business enterprise. Simillarly Dimitri started an open source thread: MiniBMS - open...
Upgraded springs are for additional 300 pounds weight. It lifts the rear tyre arch about two inches above top of wheels for a Prius without a PHEV...
With a battery voltage of 240v x 125 amps Max = 30kw According to pEEF 20kwh is limited by the boost converter. The MG2 has a maximum output of...
For anybody interested this shortcut has some basic information on the Prius Canbus...
I would have expected that the PIS ECM controller would be fooling the hardwire electrical Inputs on the ECM. Hence ECM controller. The front...
Great. At the moment I am using a ICE kill switch. Although I am happy using an ICE kill switch It would be nice to have a board that would make...
Re: Happy Plug-in Supply Customer I would expect that the ECM board would be hard-wired ? EDITED Maybe the ECM controller takes over the...
Looks promising. Maybe you should start a new thread, "My ECM controller project". I am not familiar at all with EEprom Flash programming. I think...
