Separate names with a comma.
Your Canview shows a internal resistance of 0.31 ohms? Check to see if there is a DTC code on the DTC screen page. Clear past DTC codes then cause...
A modified CCL of 0 amps will cause the Prius to cancel regen braking and do compression mode (friction brakes) instead which explains your...
If these aftermarket PHEV kits were made by automotive companies then, yes, they would be well engineered.
I have never heard of any Enginer customer who lost their refund to Jack and be threatened with legal action. Just pointing out a difference in...
This YouTube video about body kits shows how the suspension springs are replaced. Five Axis Edition Toyota Prius - Install Video - YouTube
The K40 pack is a 4kwh Enginer kit. You can buy these on EBay and have it delivered to Australia and install it yourself if you like DIY stuff....
Texas - you can also criticize my posts on the Enginer User forum, also, the joy...., although lately the Enginer user forum seems to have become...
The fact that PIS does not sell their kit on EBay is a big question mark for me. If Jack Chen can sell his Enginer kit on EBay then why can't Robb...
Should be 76 cells x 3.2V cell nominal voltage = 243.2 Volts EDITED - 16 May 2012 My BMSplus uses 70 A123 pouch cells x 3.3V = 231v...
The bus connectors (I assume you mean connecting plates) are probably silver plated copper or some other sort of plating. The silver plating is...
Re: Happy Plug-in Supply Customer Thanks for the photos. Just wanted to know whether your 10KWH PIS kit can do EV mode only up to 70MPH and...
It is possible that Robb got his customers mixed up and Navy was unfairly treated. This is not out of the question. I remember getting a email...
Same here, went back to 70 cells for some time now. 72 cells was just too much voltage.
Mine varies between 0.05 and 0.09 ohms. Never seen it go any higher than 0.09 ohms.
Yes, liability is exactly it. Worst case is that if it was badly installed or became faulty it would cause the ICE to be shutdown and go electric...
Maybe if there was a video I could see exactly how it is done without using a spring compression tool. It is not easy working from photos I...
PIS is the only kit which can enable ICE up to 70MPH in EV mode. I figure that a BMSplus device can be used by physically connecting it between...
Can you explain what is going on in each YouTube video of the Elcon charger. I believe that at the end of charge you get either: 1. Flashing...
I am looking at buying this item on Ebay and using it to drop out the 200A contactor when the regenerative braking current is too high. The price...
