Separate names with a comma.
I spent a lot of time lining up the coil spring compression tool so the spring would go into the correct position. The only part which was...
I had to remove the rear plastic mud guard flaps using a 10mm socket. See photo. The second photo shows where I positioned the stand, it allows...
Did you try asking? I got plenty of quotes from Ebay sellers but not for any of these particular scooter battery packs. I just paid the seller by...
I finally installed my heavy springs on the week end. I found the job a lot harder to do than expected. Even after placing a stand under the...
It has been a while since I made a post on this thread. Just put in a fire extinguisher into the front door pocket. See photo. Just in case. Hope...
It would be interesting to know whether it was Navy who made the scam report or someone else, maybe another example of slander by someone making...
Re: Use a credit card buying stuff from small vendors! Hi Paul, As a PHEV kit installer for 3ProngPower do you accept payments by Visa,...
Maybe your promise of a refund was rescinded after Robb saw this ripoff report on the Internet. Ripoff Report | Plug In Supply Inc | Complaint...
Yesterday I just moved some posts from the other thread Using a BMSplus with lithium, these posts are more applicable to this thread.
My Elcon charger will arrive on Monday. I just received a tracking number 5 days after it was posted. It will take only 38 days from paying to...
Do you have any more details? Is it standard or does it have to specifically setup for this? The control plug has extra wires, maybe this is what...
I found a lot of websites which have a Elcon PFC manual but lacked a lot of info. Anyhow I have found a 10Kohm pot to use as a current controller....
I got this response from Dimitri on the other forum DYIElectriccar http://www.diyelectriccar.com/forums/showthread.php?p=282815&posted=1#post282815
Despite this they will set the maximum voltage to your own unique setup - 14 days at least. These max voltage of 258v or 320v are probably setup...
The miniBMS can be bought with a HVC of either 3.65v or 3.80v, you specify which one you want when you purchase it. Most BMS units have a HVC of...
Back to Elcon 1500 end-point modification. I used my DMM to measure R1 to be 504.1kohm and R2 to be 10.02kohm. Assuming that the control voltage...
Your HVC ( high voltage cut-out) is very low 3.54v. You can take it as high as 3.8v. Better to be safe I guess. Best to lower Elcon charger...
The Nissan Leaf just hit the market in Australia. Just for a low AU51K. No economic downturn here...... Yet.
Initially my first Enginer kit spent more time out of service waiting for warranty parts than being in service. I will not go into detail as...
Despite all the doom and gloom I have a PIP which I have not filled the petrol tank for the last four months. I do EV to work and back mon-fri on...
