Separate names with a comma.
Remember the Prius is Atkinson Cycle not Otto. I believe this delays the closing of the intake valve to reduce the volume of fuel/air during the...
Using my Accessory/Cigar Lighter Port monitor and Digital VOM at the 12 battery posts I regularly see the battery in the upper 11 volt range after...
Correctamundo.
This too happened to me several months after taking delivery of my 2018 Prime Advanced. Recharging the battery took care of the problem. As to why...
Telematics
Just another thing Carista does.
How much do those external sensors and batteries weigh? What do they do to tire balancing? Significant? Negligible?
My opinion on navigation ... Database ok if you are not traveling in a lot of new developments. Interface has too many options and are hidden in...
I “believe” Carista tells you four pressures but not how each temp maps to location of vehicle.
When I was in college mass data stores were on punched cards and paper tape.
That’s why most cloud services will offer you the option to upload or download large amounts of data on a usb appliance via snail mail/messenger....
I just checked. Locking the doors via the fob buzzes/beeps and blinks the clearance lights not the headlamps. Does your prime have any add-on...
Sounds like the doors locked via the key fob.
Can? Should? You probably can but Toyota’s party line is no. Maybe disconnect the negative on the Prime battery so as to electrically isolate it....
I think cold cranking amps is almost meaningless as it doesn’t need much more than two lantern batteries to “start”. The traction battery does all...
I had a similar situation shortly after I had my 2018 Prime. The 12V was low so I put it on a maintainer for 24 hrs and it's been fine since. I...
Report back in 12 months.
It’s the beep (Toyota calls it a buzzer) for opening the door in ready. It’s a warning for a good purpose. Just press the on/off button prior to...
New Trump mileage standards to gut Obama climate effort
The backup beep is customizable by a dealer or a myriad of apps via the ODB2 port. I personally have it set to a single beep. Problem solved.
