Separate names with a comma.
Hello Everyone, I am finally overcoming my laziness. I was out of town for a week. When I got back I charged my New Gen 3 kit. It charged evenly...
Hi Fibb222, Good to hear that you are now doing well with your system. Thanks, Dan
Hi Floyd, Both you and Fibb222 may have your converters set a little low. Adjusting the converter is an Installer function. Your installer should...
Hi Mike, I understand your point of view. Just keep an eye on the progress. Things are changing quickly. Thanks, Dan
Hello Everyone, I have gotten 2 kits in late February and many others have also. These Kits are much improved. I would like to see some first hand...
Hi Mike, Not yet, but they are getting much closer. I was getting 45mpg. I drove my 2005 for a couple of weeks getting an average of 65mpg with...
Hi Paul, You can get 1ohm 1watt resistors at Radio Shack. But I also got a 2.3ohm coil resistor at an auto parts store that handles about 50-100...
You put 32 cells in parallel to be sure that you drain them all together to exactly the same level. So 2a/32cells is only 63ma. This is way too...
Hi pbui, My guesstimate is 6 minutes per bar. If you have a clamp on DC ammeter you can check it. You will have 10a at lower Prius SOC and then...
Hi Adric22, Yes, I can see the value in seeing at least the red light that truns green without opening the back. The lights are very bright....
Hi Paul, No, this information is not available to be posted. If you need your converters adjusted you need to contact your insaller. If you did...
Hello Everyone, I got the cells paired up. [ATTACH] You can see the straps that I made. Each quad pack is two buddy pairs. I will Get my next...
Hello everyone, I left cells to sit over night in parallel. Then I broke them down and check individual voltages to be sure that they are all...
Yes, this is correct. I have had all cells in parallel for 2 days with 8-16amps going into them for much of that time. They will sit static over...
Hi Chan, I would think you would want to Quad Buddy the cells but use the 2 breakers in parallel with one converter on each breaker. Then set the...
Hi Sam, Yes, I believe you are pretty close on understanding the concept. I do see SOC recal's at various times. I saw in one thread that a recal...
Hello Everyone, On Setting up the Buddy cells, I got the 8 straps finished. I charged all the cells, including the new ones. I took all the cells...
Hi Pbui, I think the DB8 balances well at the top and at rest. Under load the shunt will mean less power from the cell with the shunt on and so...
Yes, I think you should expect 65mpg for about 20 miles with a Gen1. This may take some care with how you push on the peddle but I think it is...
Sounds like the Enginer Kit would be perfect for you. Either 2kwhr or 4kwhr. This would get you the capacity to do what you want for the short...
