Separate names with a comma.
First, I assume you are getting a green light both at the switch and on the converter. Get a Clamp-on DC Ammeter $65 at Sears. You can clamp it...
I agree, Invest your money in a Gen3 2010 Prius. If you must look at PHEV then go for as much battery capacity as you can get because you will...
Hi Greg, Yes, I agree with you. I learned a lot from what I had done. I can see the effects of the "long thin wires" in my CellLog data. I am...
Hello Everyone, Today I got 2 replacement cells from Jack to replace my weak cells. This means taking apart the battery pack, so I will do the...
Hi Dave, This is a very interesting topic. I think you may want to start a PHEV vs Pure EV thread to discuss it further. I have a comment on that...
Hi Dave, Yes, you would need gas but not much. If this is in your 2010, EV only works up to 25 mph. So anytime you hit 25 you get kicked out of...
The light flashing means that the total voltage drops below 46v and then the converter goes off and the cells recover enough to turn the converter...
Hi Dave, The Enginer system only does about 5 miles in constant EV because the 10amps does not keep up with the EV needs. The weak cell will...
I think that the red light means that Kammssss was trying to run the converters with the cells drained. Because he could not charge the cells...
Hi Dutch, The "pic" is in the 1-30-2010 post. Did you not see that? If you have questions about that picture, Please be more detailed in asking...
Hello Everyone. I am still running this system successfully. I did 2 trips yesterday with a charge in between. It was a total of about 45-50...
Hi Johnathan, Of course Chan will give you his opinion about capacity based on his experience with his 8kwhr kit. However for best information...
Hi adric Yes, Everything is normal. Tomorrow you can drive it to discharge. I assume you were in a panic because you had alarms. Remember I said...
A full volt differance is a little high. So it must be about 26.7 and 27.7 for the two balancers. Is this at rest or with the charger running?...
Hi Adric, Do you have 2 Chargery DB8 balancers? If so, The main predictor that a person with no tools would have to SOC during charging is the...
What is the no load output voltage for each of your converters? For a 2 converter system I would recomend about 235v on one and about 242 on...
Did you read the installation manual that is on the Enginer Web site? It states on page 10 to connect to H12-2 and H14-31. They provide a splice...
Hi Chan, Yes, I agree with your concept that the Enginer kit is not an Electric Car but rather the Enginer kit is recharging the Prius HV Battery...
Hi Chan, I did get a cell that hit the knee on the bottom. The CellLog caught it safely. It was not one of the lowest cells in the 300mv imbalance...
Hi Fibb, I am not sure I am understanding your coment. Did you run the car for 10-15min? Are the voltages you are Quoting all "at rest"? Do you...
