Separate names with a comma.
I have a 2005 with EV on the light flasher arm, and a 4kwhr Enginer kit. I agree that the EV works best with the plug-in capability. I can go 4-5...
Hi Chan, Thanks for the advise. I am monitoring closely as you advise. It sure is nice to be able to get the data off of the CellLog. Also I have...
Hi Chan, Thanks, I think the differance between my data and yours is the way I have the cells buddied together. The resistance in my buddy jumpers...
Hi Everyone, I did 26 miles at 69.7mpg. I am getting a charging alarm regularly for upper pair#6. But it looks like upper #2 and #3 and lower...
Hi Chan, Yes, This 300ma is while pulling 55a-70a from the pack. Note that when the current is off it immediately drops to about 50mv. So that...
Hi Fibb222, OK you should do as Jack suggests. He is the one that owns warranty replacements if you have a problem. Remember to pick the 4 cells...
You need to bite the bullet and do the buddy cells first. If you can not do it yourself, then I would recommend that you contact one of the...
Hello Everyone, I drove 20 miles on Saturday and 26 or so on Sunday. Both at about 65mpg. Sunday I had the CellLogs running. [ATTACH] You can see...
Hi Fibb, Chan is correct that first you need to Buddy cell. If you do not do this you will kill cells again. I am not sure if you have a capacity...
Hi Adric22, I have not done this part yet. I am still opening the back deck to plug in because I am going to move this kit into my other car when...
Hi JonnyD, Yes, you are correct. This is because the balancers use are really designed for smaller cells. The Balancer shunts 300ma from the...
Hi Gene, I am sure that the Enginer system would do the 2mi there and 2mi back in a Gen2. I have done 5 miles or so. Your problem is that you...
Hi Adric22, Why don't you start your own thread on putting together your Engineer Kit and getting it into your Gen1. I would like to be able to...
Hi JonnyD, I am sorry, I do not understand. What "problem" are you thinking of in your message? I did not think I was describing a problem. I...
Hi Force, Yes, the topoff is less than 50 watthours. The purpose was to exercise the process of data collection. It is not worth it for the 50...
Hi Gene, I think you are not understanding the Enginer system. I suggest that you read the PHEV threads in the Gen2 section and Also the Enginer...
Hi Everyone, Today I made a couple of splitters out of Chargery adapter boards. The balancer cable plugs into the board and the board has 2...
Re: First Enginer PHEV install in the Portland Or area, Gen1 Hi Gene, Congrats on ordering your kit. We should get together some time. I...
Hello Everyone, I have driven 2 days and done 2 more charges. About 25 miles each at close to 70mpg. Both charges ended with an alarm. I was...
Hi Kammssss, I would send jack and Email. He has been very responsive. Also You could call an installer near you to see if they have one. You can...
