Separate names with a comma.
Either transport on a trailer-tow truck. Or towing for a short distance at low speed with the transmission unlocked in neutral mode. A...
Yes. These parts are used in Gen3 suspension.
To measure current, smart people invented the ammeter. When you connect a light bulb, you apply resistance to the module, not voltage and...
Try using the program for Android phone Hybrid Assistant. It will be able to record data of hybrid systems during the trip and generate a report.
Yes. You might want to check out this thread. https://priuschat.com/threads/want-to-install-an-engine-block-heater-yourself-this-guide-may-help.35035
Can you describe in more detail what happened? Does the P 261B code appear again after cleaning?
If the motor temperature is too high, the resistance varies considerably, which hinders determining malfunction. Therefore, measure the resistance...
Yes, everything is inside the battery case. Battery PHEV by MAX2 posted Feb 13, 2025 at 11:28 AM
I agree that the sounds are different. In absolute silence, from the moment of switching on until the moment of starting the engine, there are...
The sound when you turn off the car is most likely associated with the pumping of heated coolant into the thermos. Periodic creaking sounds can...
I went to the site, found many functions of this scanner and a lot of cars. LAUNCH X431 Creader Elite 2.0 BBA...
The Prius is packed with electronics, it has more than a dozen different electronic control units, and therefore, when the hybrid fails, DIY...
Autostart and warm up the car in the parking lot for 15 minutes. The engine coolant temperature reaches +40+50C degrees Get in the car, switch...
I left my choice on HLG-80H-C350 It has output current adjustment (210 ~ 350)mA...
Here is a simplified diagram for generating system EPS errors EPS2 by MAX2 posted Feb 12, 2025 at 5:43 PM
What scanner do you use to search for errors? If the EPS system is faulty, you should also have errors for this system. The system itself is...
