Separate names with a comma.
12 volt battery: 12.1 volts. That's a big issue. 12.6 or above after sitting overnight. Did you get it from Toyota? Check the warranty on it no...
Any Update????
Any update???
It's seems to be common to find water in the connector. Maybe remove the connector from the a/c and spray cleaner in the connector on the...
For about $500 you can get the Xtools D8. And register the keys, plus have access too all the other sytems and diagosis. Update: I also...
I don't believe there is a "low battery" icon for the 12v battery. Don't forget to charge the new battery for 6-8 hours at 5 amps or less.... The...
The 14.4 volts is from the inverter, charging the battery. Turn the car off, then measure the battery. How old is the 12v battery? If it's 5...
20 May 2024, 38,000 on the new head gasket.. [ATTACH]
Take a voltage reading at the connector for high and low beams. A bad ground is a common issue for headlamps that are dim. If they bulbs are...
If you have techstream, or the xtools computer or a code reader that can program the sensors, then yes you can do it yourself. One of the auto...
Youcan'treadwhatyouwrotebecauseeverythingistogetherandthereisnoseperationandit'sjustnotworthtakingthetimetotrytofigureoutwhatyourtypingorwhatyouare...
???????? Paragraphs!!!!
When I bought their "kit", it had those cheaper shocks. That's probably what the other person did. You'll have to get the bellows and bumper....
You waited too long to clean the cooler. The damage was already done.
Did you change it yourself? It's an easy repair. Everyone seems to want to make it seem like a scarey thing to do. It's really not. Who...
Why not just change the inner tie rod? That's likely what is loose. And why are there only 4 luck nuts, not 5?
I believe the Plug in is different, or it could be a "V"....
You KNOW they are the cheap chinese crap, and STILL buy it. o_O:eek:(y)(n)
Yet you trust the chinese stores on ebay and amazon???? :confused::eek:(n) "I don't trust the Bosch brand at all. In the 2000s, I saw enough of...
It will only clear the codes, which you can do with a proper code reader. You need to check everything first and make sure all is correct. ( See...
