Separate names with a comma.
Thanks for checking out some of the technical views of the next-gen MFD on my page. Oddly, many members who use Scangauge data wanted something...
There is no coin-holder per se. There are aftermarket products that stow coins in the cupholder(s) you can get. There is a small tray towards the...
Thank you cproaudio! I would not have thought to look at that thread for my problem, but sure enough, Snake Doctor has done just what I will need...
I had a friend drive my car while I was in the rear hatch area trying to find a bad rattle. I discovered that it is inside a large plastic panel...
I had to adjust my thinking on the "slide back then lift up" concept, but realize it's for the second cupholder, if used. I took the second...
And then there's possible mold issues if a lot of rain got into the carpets.
If you follow my mod, you will see that I mounted the moldings "higher" than recommendations just for SUV and truck protection. We have a lot of...
Craig, you're welcome for the suggestion. My LED mod is an answer to many members here who complained about the lack of lighting at night for the...
It all depends on how "safe" you feel your doors are in parking lots. I added the moldings and they look fine. The color is an exact match to the...
If you follow my mod, I describe how to remove some of the plastic loom that protects the wires to the LED above the lower glovebox. Then you have...
Craig, it sounds like you've already done the wiring. If you follow my mod for LED lighting of the low-bridge console, I discovered a tie-in for...
OP - are you looking for 12 volts switched on when the headlights are on? I would think that's how you'd want the auto-dim mirror to work.
What the dealer's installer should have done was set the KARR system so when you press the START button, the doorlocks automatically "lock" when...
It could be the common noise from the lower glove box. Here is a cure: Put a bit of plumbers grease (silicon based) on the internal plastic...
