Separate names with a comma.
Depends, do you want it to work correctly? Or just hang there as an ornamental piece of steel? [emoji23] .
Do you need the spacers for the rears? Were you able to test fit the rims on the car? If you do need spacers, try to get ones that are hubcentric....
FYI, the FRS rims on a Gen 3 in the past required a 3mm spacer to clear the rear brake caliper holder. The 16 inch old school Subaru Impezza WRX...
Since you're already going to a heavier 17 inch wheel than the stock rims, you should definitely get the lighter of the two tires. You don't want...
Over 200,000 miles, how is the engine idle? If it idles rough, the EGR valve could be stuck open slightly. That could cause rough running and...
What year is it, and how many miles are on the odometer? Hopefully, not too much beyond 150k, since you'll be doing its first egr cooler and...
You're apparently, also a time traveler from the future. [emoji12] .
There is an engine mount in the area under the inverter, behind the radiator. Perhaps the engine mount has deteriorated, allowing more than...
Could it also be speed related? .
"Well, you just have to ask yourself one question, do you feel lucky today?" I prefer to play it safe and not risk having to pay the deductible...
Also, after the H9 bulbs I switched both cars to HIDs, also known to give off quite a bit of heat. No problems, and it's been years. Posted via...
You were able to mount bulbs into that melted headlight housing mount? Are you sure the bulb sits at the proper angle? That doesn't look like it...
The Prius is a relatively heavy car for its size due to the extra hybrid hardware. It's not meant to be a sofa on wheels. Look at the Camry...
Pretty pricey though, I bought some 3/8 inch OD aluminum tubing and bent it to make my own u-tube and 90 degree fittings. In the end, I used the...
It says it's not compatible with fuel and oil in the description. .
Saw that early on, I guess on hindsight it would be a good way to go. You'd still need a few barb connectors to join everything together. Posted...
Looks like it would rattle against the inverter or the frame above the headlight. Also, why is one hose clamped and the other hose not clamped?...
Here is the stainless mesh I put in the OCC. I cut 3 inch wide strips of the mesh, rolled it up into cylinders and crimped the ends of one side of...
I used AN type fittings for my installation. In particular, I used these two types to relocate my PCV valve to the OCC and to make a 180 degree...
The second pictured mount you posted is just a large aluminum L stock that has one side of the L cut off. The other side of the L has been bent...
