Separate names with a comma.
Thanks for starting your thread. It has opened up a new window of opportunity.
Hi Plugin, You probably have already thought of reconfiguring your Enginer battery pack. The RFE F20 pouch cells have a max discharge of 40 amps...
You can use a Canview relay to do this. My Canview V4 has five relays which I can use. One controls a HV battery fan mod to keep the NiMH cooled...
It should be stated and be clear to anyone attempting this project that 240Vdc can kill you
Ok. Before you enagage the contectors what are the possible battery voltages of your NiMH and lithium pack. The NIMH could be as high as 240v at...
Hi Plugin, You can use two contactors to engage the battery. The first contactor will put in a high power 10 ohm resistor in series with the...
The A123 pouch cell data sheet is very vague. It is possible that the A123 cell is capable of a charge rate of 4C for a few seconds during regen...
That's great! Couple of questions: 1. What is the charge rating for your prismatic pouch a123 cells. They appear to be made in Korea. I see they...
It is normally done with up to extra 3 OEM Prius NiMH HV packs in parallel from other Prius's from the wrecker's yard. As far as I am aware nobody...
Anybody using a mini-VCI Xhorse J2534, TIS compatible (Chinese clone)? I bought mine on EBay....
I suspect that you are using BMS16C. Which BMS are you using? The single small plug with just two wires is the signal to drop out the converter...
Plugging the wrong plug into the wrong inlet will damage the BMS16D and converter. I have experienced this first hand. A very expensive mistake....
Have you given up on getting a pEEF-gauge?
They now cost US$500 plus delivery. Mine is on order. They now have a three week lead time. I guess there will be a bit of waiting.
Hi EPA, You do not need to drill holes into the Enginer box lid. You could either use silicon sealant or adhesive Velcro. The noise made by my...
I used 8 fans from eBay http://www.ebay.com.au:80/itm/ws/eBayISAPI.dll?ViewItem&item=180717278446 The CPU cooler I salvaged from a computer that...
Below is a photo to my latest cooling mods to my MDTECH DC Converter which will be mounted on top of my Enginer box lid. Thus using the open...
I paid US$350 plus delivery from Jack about six months ago for a 5kW converter. I was later reimbursed once I delivered the faulty DC Converter...
Have you thought of using a simple and cheap electric blanket?
Floyd2 is getting a FE of 1.7 liters/100km in the Netherlands using a 4kwh RFE Enginer kit. Pretty good. The roads are flat and it is a cold...
