Separate names with a comma.
If you read my post you will find that I never suggested that he "add an extra dollar". I told the OP, this is what I do when I have this problem....
It justs sounds to me like one of your connections are bad.
I think I've been very clear to say that's what I do. I'm not even close to trying to say my experience is the end all do all be all....
The function is aerodynamics and aesthetics. If you look for an online Toyota dealer, they will likely be able to get it for around $100.
There is a black cable connected to the battery in the hatch. Once you access the battery, you need to unhook the black cable from the battery,...
There is a panel removal tool that I have that helps with this. If it is very cold out, you may break a clip. Plastic gets brittle when its...
Well, keep in mind that I saw somewhere (on here and I don't know if its true but it seemed to make sense) that you need at least 3 gallons added...
If you're only able to put in 7 gallons, you can easily go another 150 miles or more (If you're averaging about 45 mpg of course). These gauges,...
I would only go to 500 if I was achieving 50+mpg (theoretically, that would leave 1.9 gals in the tank). It does take courage to go to 500. I...
Very common scenario in these cars.
No, I'm putting 2 and 2 together. The tank on a Gen II is rated to hold 11.9 gallons. The OP says he can only put in four gallons when his guage...
Its obvious to me because I've seen this problem so many times including on my own vehicle (although not to this extent). There is no way a 12 gallon...
$200 to fix that is actually a steal. I would pay it.
Here's what I would suggest: 1) Don't take it to a shop, they will take you if they can and this just allows them to take you. 2) Fill it up,...
Yeah, this sounds like a stuck/defective button on your old fob. Glad to hear you overcame your obstacle. That's what this is all about.
A pint is not much. What probably happened was they didn't get all the air out when they replaced the pump. Over time, the air was purged and...
Hand tight????? That's not near tight enough. You need to find a torque wrench. I think the gap is supposed to be 1.0 mm (check on that though).
As usual, they look perfect still.
The difference is unbelievable. This really shows you how important the first transaxle fluid change really is. Thank you for posting this uart.
Ok, if you want to put it like that then, the Gen I is still the first Gen to use prismatic cells
