Separate names with a comma.
I still have the old SHO. It's about to go under the knife for a "refresh" as it's gotten kind of "tired" from the 190 mile a day commute I was...
Torque Sticks are what most shops use for torquing lug nuts. They are a professional grade tool and have a lifetime warranty.
From my recent experience with buying totaled Priuses I would say that it's totaled.
There should be plenty of power for it to work with a 10 amp fuse. Most electric torque impact wrenches run about 1 RPM a full torque so that...
That looks like a rather cheap tool to me. I personally use an 18v DeWalt impact wrench and a torque wrench but if I wanted to use my DeWalt to...
My 2008 Prius smells exacly like my moms 2008 Camry in the inside.
My question is why did they keep your car for 2 days to fix the clock? Normally when you bring a car in for a non critical (ie the car does not...
You will also be interested in what your $700 bought: [IMG] Yep, that's the entire Karr alarm system.
When you replaced the axle did you refill the tranny fluid for any that you may have lost? Can you pinpoint the location of the noise? Is there...
What was the extent of the damage that you repaired? That will help with the diagnosis.
Also, if you have the TOY-SC1 with the SCC1 you can swap out the SCC1 for an SCVDOC1 later if you want to have a portable unit.
My salvage car had a Karr system it it when I got it. That was the first thing I threw out. The only thing it was good for was draining the 12V...
What stock?
What year Prius? There was a change to the back seat in '06 to give it 1" more headroom.
That is unlikely. To create a differential in speed between the front and rear wheels you would actually have to be dragging the back wheels...
The reinforcment bar extend slightly past the frame rails on both sides. Here is what it looks like: [IMG] [IMG]
The wiring for the fog lights is not present in a non fog light car. I bought a fog light kit that has it's own harness and installed it like...
There is a crow foot attachment that screws to the end of the slide hammer and goes over the end of the inner CV joint. It looks like this:...
I installed a set of hornes from a Lexus. They bolted on in the stock location, had the same connectors, and cost about $15 from ebay.
That thing is horrid.
