Separate names with a comma.
Yes, I installed a new drivers and passenger side airbags along with new seatbelts, clockspring, passenger side air bag short harness, and a new...
The drivers side looks fine, it's the passenger side that's off. I'm not in a giant hurry to order it as the current hood will do the job for the...
Just as I though the top edge near the headlight measures 56-7/8" That just about the amout that's it off... Anyway here are a few more pics:...
It's quiet easy. Here is a link for the instructions: http://www.jelloslug.com/stuff/prius/ET%20-%20Exterior.pdf
It would take a little more than a "little electric fan" to pressurize the intake air. You have to make the pressure higher than what the engine...
It cost $11,000. I just added up to total cost for all the parts since I have now purchased everything to repair the car and they came to $4742....
It's located on the lock support post that's runs vertically under the hood latch. It's about half way down the support, opposite the horn. You...
Painting the top of the dash is a legitimate repair. The dash top is painted from the factory anyway. Now painting the dash top inside the car is...
It really depends on the envrionment you live in. It's very simple to check and change.
One thing to keep in mind when thinking about the Prius 12v battery is that it's main function is to power up the computers and accessories before...
Yes I did BUT it all depends on the primer you use. I used a sandable primer that is made (and needs) to be sanded before you topcoat. If you...
I have spent quite a while to get it just to this point so I can understand how it would take a while to get one lined up. You should have seen it...
You won't see proper mileage until about 5000 miles. It takes that long to break in the car.
Thanks!
Thanks for the pics. Could you measure across the middle corners of the hood? These would be the corners that would meet the fenders and the top...
Here is a minor update. Actually more of a rant. The new aftermarket hood that came with the car is an utter piece of garbage. :mad::mad::mad: I...
Normal body filler is fine for just such a repair. It stays flexible enough after it's cured to handle the normal flexing of a bumper. I would...
That's an easy fix. Any body shop should be able to fix it and now there are many of those paintless dent repair places that do spot work just...
I put several coats of clear on front edge of the hood and front face of the bumper. The clear I used has a catalyst hardener so baking is not...
From what I understand (in the Southeast district at least) the dealers can see what's on the boat but it's already doled out before they have a...
