Separate names with a comma.
This thread seems to be driven off track by a couple of rambles. The essence of the question in the OP is what tool does he need to remove the 4...
That actually doesn't look too bad, you try to clean them up with some contact cleaner and some friction with a cloth or a popsicle stick. What...
I seem to remember the 4-button and the 6-button are wired differently, in particular the B+ in wire so you can't just swap them over. You stand...
Maybe the second fob needs a new CR2032 battery. What is the voltage of the current battery in that one?
In post #7 above, the first image is the MAF sensor wire that needs cleaning. The second image show the temperature sensor. This also may need...
You are not driving enough to keep the 12 V battery fully charged. Buy a automatic multi-stage battery charger and use it regularly. I've been...
You don't need to reinvent the wheel. There are accessories you can buy that you attach to your battery and will monitor your it. It will alert...
I see this advice a lot, mine turns off when the hatch is shut. Do NA Prii not do this?
The OP's (last seen here Jan 25, 2014, so don't hold your breathe waiting for a reply) battery was dropping to 7 V so was well passed the use-by...
Gen 2 modules are getting pretty old. Gen 4 Prius (NiMH ones) or late Gen 3 is what you should be looking for. Anything 5 years or newer would...
Your modules are old and tired and are simply just running out of juice. Time to look at replacing if you want to keep this car going. You can...
I DIY on a daily basis with good results.
There are in⋅lbs and ft⋅lbs (maybe you weren't aware) so if someone is giving torque as just lbs, then you need to stop and find another video.
Check all of them – remove one, check it, if good reinstate it; if bad replace with same value quality fuse and reinstate it, repeat until all are...
[ATTACH] The -B3 and -E2 on the end denotes the color, presumably gray and beige. I'm sorry, but I don't know which is which. You might have...
That's a possibility. So, does that mean you checked all the fuses (with an ohmmeter, or a voltmeter if your fuse have probe points along the top...
I'm now wondering whether the machine reinserts R134a to equalize to atmospheric pressure so the system can be opened. There is certainly no...
As I understand it, evacuating is removing the refrigerant. Drawing a vacuum or vacuuming down is removing air and moisture after the system has...
IG-ON.
That is not accessory mode (ACC), it is IG-ON. The first button press is ACC. I notice you're pressing the button for a second time and holding...
