Separate names with a comma.
Holy wall of text Batman! Lol .
+1 very strange to just change one side of the front brake rotors. Definitely should be done in pairs. How old was the battery? Maybe it's just...
Yes, no oem centercaps. However, there are many silver color 57mm centercaps available on eBay for the Prius/Yaris/Matrix. You can buy those,...
I removed and cleaned the intake manifold on our 2014 Corolla when I installed an oil catch can, and there was no egr cooler, and no egr passages...
Update: There seems to be too much oil mist getting past the OCC and condensing in the tubing after the OCC, as there is a fair amount of oil in...
All the measurements listed involve taking the EGR valve apart. Except, it was mentioned previously that the new valve installation required...
It's basically a length of flat steel bar, a metal fabrication shop could easily make that piece for you, and even make it out of heavier gauge...
Here it is. [ATTACH] .
I agree, it is a brace, not a sway bar. All sway bars are shaped like a long flattened U, or a rectangle with one of the long sides removed, never...
We're at 125k and I just lubed the caliper slide pins with SylGyde silicone grease. Go to the maintenance forum and check out the how to video by...
If these are new and unmounted, you should say so. As it is, it sounds like they are used and are take-offs before the car was sold. Posted via...
Here's a picture of my 2011 with 125k miles, same general area minus the EGR tube. [ATTACH] .
Can't tell, but what struck me was how everything (nuts, hose clamps, etc) is very rusty. My bolts, nuts, and hose clamps are all silver and...
I once took the Prius to the dealer with a 5 qt jug of oil. I figured I'd get it back with a bit of oil in it. Nope, not only did they dump all 5...
Same here, I use a 17mm Park cone wrench for bicycles. .
Try taking the oil reading with the dipstick from your other v. .
5 qts is too much, should be around 4.4 qts .
I'd rather put that kind of scratch in for wheels and suspension upgrades. It looks like you're still on stock wheels? [emoji6] Posted via the...
If it is a non oem part, it might not be measuring the right level/amount of oil in the oil pan. [emoji848] An overfilled engine is bad too....
It's a two shot series, the second shot is two to six months after the first one. .
