Separate names with a comma.
The roof racks don't have a very good weight rating, put too much weight on them and you risk denting the thin sheetmetal. And, as you stated, the...
Depending on the length of the 2x4 lumber and the quantity, you can fold down the rear and front passenger seats and transport up to 8ft long...
Cargo tie downs, straps, bungee cords, or good old fashioned rope. But by your question, I'd be a little sceptical that you would be able to...
Do it, if you want to create electical arcs between the poorly connected terminals/cables that can burn the tape around it and cause a fire. Your...
Don't you have to address the real cause of the oil burning and head gasket failure though? The pistons, rings, and probably worn cylinder walls?...
There's a YouTube video where a small putty knife is slipped between the EGR valve and tube to block off the flow to rule out an EGR valve that is...
I try to avoid taking off the undercover at all costs. Nothing easy about jacking up the front end, placing jackstands, removing the cover, etc....
Regarding messing up the threads on the original PCV valve location, you don't have to worry about that since the OCC fitting is aluminum, which...
Your OCC location inspired me to move the OCC in our 2014 Corolla. It was previously mounted to a bracket that I affixed under the battery tray....
Wow, snug as a bug in that location. Are you able to lift the can out of there with the hoses attached when it comes time to empty the OCC? Also,...
How old are the batteries in the key fobs? Did you try putting the fob in the slot in the dashboard? .
Are you sure all the connections in the OCC installation are air/vacuum tight? I used thread sealant (Rectorseal TruBlu) and hose clamps on all...
Not could've, would've. That's why there's usually a pool of oil sitting in the intake manifold under the throttle body waiting to be aspirated...
Knowing what I know about the early Gen 3 Prii, I would only take that high mileage 2010 if it were free. Then I would do the intake manifold and...
It's located next to the intake manifold and throttle body. [ATTACH] .
I'm curious, where is your OCC mounted? I'm thinking about relocating my OCC, which currently sits on top of the front crossmember, under the...
I only got knocking and shaking after cleaning the intake manifold. I didn't dry out all the water from the intake manifold before putting it back...
She'll be a lot safer as well. My little league coach was badly burned in his VW, when the gas tank under the driver's seat caught fire in an...
I can't stand those super bright LED foglights on the new Tacoma/4 Runners, especially because some of them are pretty high, making the glare hit...
Probably all true. I might just keep my original 50 intake, clean it out thoroughly and keep it for swapping in, like I do with the EGR cooler....
