Separate names with a comma.
Yes, please do let us know what you find out regarding the part number stamped on the intake manifold. .
Isn't that the OPs notes from a phone convo? .
I think that the 91 part includes the 54 intake manifold and all 3 gaskets. When you receive the 91 part you ordered, please confirm that the...
I'm going to remove the 17120-37050 intake manifold in our 2011 and install the 17120-37054 intake manifold I cleaned out. In the meantime, I...
OP, do you often drive with all the windows down? What was the outside temperature? Here in Hawaii, it's better for the high voltage battery to...
Hmm, I've got priuschat installed on my Samsung S20 FE. [ATTACH] But! I also can't find the app in the Play Store. [emoji57] Posted via the...
Priuschat app, I don't have major problems with it on my android phone. Sorry to hear about your car. Sounds pretty serious. Did you check...
Handheld anemometer. [ATTACH] .
The mesh is cut to size and fitted to the inner side of the grill openings. I used small zipties around the OEM grill slats. Some use hot melt...
People have had rocks come through the front grill openings and damage one of the radiators. Sounds like something like this may have happened to...
Alternatively, one of these could be rigged up between the EGR cooler and a vacuum source. [MEDIA][ATTACH] .
Perhaps something like this could be rigged up to measure gross flow through the dirty and cleaned EGR coolers. I'd definitely use some kind of...
It's plastic though... .
When you shop for relays, you need to get a relay with a proper coil specification, like 12V DC, in this case. Also, the resting state of the...
Yeah, it looks like a dual pattern 5x100 and 5x114.3mm wheel like my Enkeis. [ATTACH] .
You need to understand how a relay works. There are basically 2 circuits in the relay linked above. One circuit, which will have the switch on...
Normally, you have to lay on top of the engine and reach down behind to get to the nuts. Getting to the nuts and studs attaching the EGR cooler...
Did the rattle start after some work was done on the Prius? I had a rattle/tapping sound that was from a bolt that I forgot to tighten on the air...
Yeah, easier to charge the customer an arm and a leg for a new one or write it off to Toyota than clean it. .
I was careful to avoid the inserts, AFAIK the drain cleaner didn't contact the inserts. Also, followed up with copious amounts of water during the...
