Separate names with a comma.
I think he meant Hitec X4s......(they also have an AC Plus version with built in power supply too).
This is exactly why unless you are doing this process in winter (ie low ambient temps that help cool the modules at high SOCs) you are best off...
Nice, gotta like it when you solve tough ones like this, congrats!
The load on the engine will dictate a certain throttle position and it sounds like you throttle position solenoid isn't working as it should be...
Here's the diagnostic tree for the code, follow it and it should solve at least the P2102 issue. http://tinyurl.com/l9qbcq9 Here's the...
Discharge is fine, mine never hit more than 0.7A with 4 modules connected at once. Charge side, you should turn off the charge time...
After load testing them all you should be balancing the modules for 24 hours before installing again.
You don't just check the voltage on the modules when you pull it apart and use that to decide if the modules are good or bad (they should be...
X2 Completely agree.
X2 The fact it passed so quickly is a good sign IMHO. Stuff like a bad converter or burning oil would be much harder to get passed without...
I never said it was required at all (I always leave the 12V on a tender and still connected while on shorter vacations) ........the CTEK is a...
You're fine, it was probably just a blip in the AC power or charger misread the delta peak. Also heed danahurling's advice on bringing down the...
Just a note but it would help if you don't keep quoting everything in every post because it gets very hard to read after a while. The way it...
What are you using currently to monitor this? I agree with the advice above......fix the P2102 first then move on to other issues as you find them.
If a Toyota dealer has been working on that car for most of its life, then ask for a printout of the vehicle service history. It can be very...
The voltage drop with the Hitec charger on discharge is too small to be noticeable so to me using the headlight's high/low beams (around 6-10...
X2 I was surprised how well your degraded modules have been doing so it's worthwhile to offer them up to others with known specs. ........when...
What sort of mileage were you getting before replacing the bad module?
What a joke, who do you think you're fooling anyway.........so much for grasping simple concepts like module balancing. X2 Depends alot on why...
Pretty simple, I like it........should work well on both the Prius and Camry (Highlander would be easier to just make a harness).
